PDA

View Full Version : 34" x 14.5" RH Merc Lab Cleaver - tiny crack - $250



Fullthrottleguy
04-22-2014, 03:34 PM
For sale locally for $275 Canadian which as of today is about $250 US.
Has a tiny crack on the leading edge of one of the blades that I have not tried to have repaired because it won't work with my new motor anyways. Fastest prop I've ever tried.

http://www.kijiji.ca/v-view-details.html?adId=582072512&uuid=14546e20-dd20-a20b-2666-10b8ffff6639

Jamescole
04-22-2014, 03:49 PM
hmmmm....

Jamescole
04-22-2014, 03:50 PM
what gears at what RPM?

Fullthrottleguy
04-22-2014, 03:58 PM
Hey James,
The 235 could spin it 6k with the stock 1.86 gears = 93 MPH
My new promax makes peak power farther up the tach. and has 1.75 gears so I'm just assuming this would be too much for it as that works out to 112 MPH with 10% slip which just isn't going to happen with stock power.

Additionally my sporty is a fat shaft and this is a 15 spline hub in it.

Jamescole
04-22-2014, 04:03 PM
Hey James,
The 235 could spin it 6k with the stock 1.86 gears = 93 MPH
My new promax makes peak power farther up the tach. and has 1.75 gears so I'm just assuming this would be too much for it as that works out to 112 MPH with 10% slip which just isn't going to happen with stock power.

Additionally my sporty is a fat shaft and this is a 15 spline hub in it.

ahh small shaft.. everything should be flo torque..lol.

Fullthrottleguy
04-23-2014, 08:10 AM
No Argument there.

FlatGreen
04-23-2014, 09:15 PM
Still have the prop?

Fullthrottleguy
04-23-2014, 09:40 PM
Still have the prop?

Not sold yet.

Fullthrottleguy
05-01-2014, 07:05 PM
Sold!