1991 Bridgeport with a promax/260 powerhead and brucato PCU $6,500

[barefooter269]

1991 Bridgeport offshore with cle gear case. Comes with trim pump and everything to make it run. Gearcase needs a toqure tab installed. Powerhead is fresh with about 2 hrs on it. It was bought on here from Fast120. He used a 225 promax block with a 260 front half. Said he did some mild porting. The compression is 152 lbs - 155 lbs on all cylinders. Has a Brucato PCU. It's part of a project boat that I have decided not to finish. Motor is still on boat so it can be run.
Everything for $6,500
everything minus the pcu $5500
Powerhead with PCU $5,000
Powerhead only $4,000

296521

[speedinstream]

I would be interested in the cowling if you split it all up is the powerhead all nic

[barefooter269]

I would be interested in the cowling if you split it all up is the powerhead all nic

The powerhead is a steel sleeved Promax block. If I part out I'll let you know. I may keep the powerhead as a spare for my Stock 225 promax I have on my runabout.

[wired247]

Any details on whats inside the powerhead? Pistons, rods, bearings?

[That's Right]

This is a very confusing ad, I can't follow what you have.

[strongback]

Release the mfn dragon!!!

[That's Right]

release the mfn dragon!!!

lmmfao

[Quinten]

I may be in for the mid/clamp and trim pump if you split.

[Lost-in-MX]

Interested. Check your PMs.

[LongShot]

Sounds to me like it is a 2.4 offshore, ridgeback mid, cle lower, steel sleeve 225 ProMax block with horn front half.