Mr. Demeanor
01-24-2014, 11:06 PM
I wanted to get this out to as many of you as possible....my fellow prop whores http://www.screamandfly.com/images/smilies/biggrin.gif
Ive been working on a couple things specifically for my ScreamandFly brothers and have one of them ready to go.
Better pricing on these new props than compared clean used props.
I have been talking with Tim at Performance Propellers about some special pricing for ScreamandFly members. I have spent a not so small fortune on props and recently started running Performance Propellers ET and Yamaha Drag style props. On my boat they have been a little faster than the comparable Merc and Yamaha props. I know other members who have found the same. Most importantly, they are not known for slinging blades (Merc.) or cracking (Yamaha). They all take Flo-Torque style hubs.
The ET and Chopper styles are 15" diameter compared to Mercs 14.5" diameter. On the ET style, the blade is a little larger/deeper at the base and smaller at the tip. Because it has a larger base and bigger diameter, it has better holeshot and midrange load carrying (hops less at least on my boat) but on the top end when its up on the tips, it runs better or the same RPM as the small diameter prop.
The Yamaha Drag styles are 14.5".
The finish, quality, pitch consistency, etc. on these is much better than the other "copies" out there IMO. Probably better than the factory props as well.
Yamaha style drag props come in a polished finish.
Chopper and Et styles are satin.
All take Mercury Flo-Torque hub inserts (NOT INCLUDED)
If anyone has any questions, feel free to ask here, PM, call, email, whatever you like. I answer the phone 9am to 9pm. Contact info is in my signature.
Here is a link to the props on my website. Paypal and Credit cards accepted.
http://shop.coolwaterproducts.com/High-Performance-Propellers_c71.htm
291014 291015 291016 291017
Ive been working on a couple things specifically for my ScreamandFly brothers and have one of them ready to go.
Better pricing on these new props than compared clean used props.
I have been talking with Tim at Performance Propellers about some special pricing for ScreamandFly members. I have spent a not so small fortune on props and recently started running Performance Propellers ET and Yamaha Drag style props. On my boat they have been a little faster than the comparable Merc and Yamaha props. I know other members who have found the same. Most importantly, they are not known for slinging blades (Merc.) or cracking (Yamaha). They all take Flo-Torque style hubs.
The ET and Chopper styles are 15" diameter compared to Mercs 14.5" diameter. On the ET style, the blade is a little larger/deeper at the base and smaller at the tip. Because it has a larger base and bigger diameter, it has better holeshot and midrange load carrying (hops less at least on my boat) but on the top end when its up on the tips, it runs better or the same RPM as the small diameter prop.
The Yamaha Drag styles are 14.5".
The finish, quality, pitch consistency, etc. on these is much better than the other "copies" out there IMO. Probably better than the factory props as well.
Yamaha style drag props come in a polished finish.
Chopper and Et styles are satin.
All take Mercury Flo-Torque hub inserts (NOT INCLUDED)
If anyone has any questions, feel free to ask here, PM, call, email, whatever you like. I answer the phone 9am to 9pm. Contact info is in my signature.
Here is a link to the props on my website. Paypal and Credit cards accepted.
http://shop.coolwaterproducts.com/High-Performance-Propellers_c71.htm
291014 291015 291016 291017