What is best product for filling in screw holes and guage holes? Thanks, Mike

[mragu]

Thanks in advance!

[87starflite]

Fiberglass

[mercracer2.5]

Fiberglass
Fiberglass X 2

[BRB]

ive had good luck with marine tex

[hoser]

Joey because he says so

[mragu]

I understand fiberglass on the back side and front side, but what kind of filler around the wood circles I insert in the hole

[mragu]

Joey because he says so

that's funny!!!

[Dave Strong]

Chopped glass mixed with resin. Tape wax paper on the back side so it stays put can do the same on the ft.

Dave

[native2]

https://www.adtechplastics.com/pc-16-643-p-77-high-heat-resistant-fillerfairing-compound.aspx

This is my favorite polyester based stuff. Sands nice. Cures quick. Very strong. Spray gel right over top.

There are many good epoxy putties like marine tex, I personally like Super Bond from Fiberglass Coatings. Kind of hard to sand, but bulletproof...

[baja200merk]

There are many good epoxy putties like marine tex, I personally like Super Bond from Fiberglass Coatings. Kind of hard to sand, but bulletproof...

That Super bond is some mean stuff! Hard as hell :iagree:

[Stoker1]

I've used epoxy mixed with baby talcum powder. Sands pretty good and strong. (rc boat use)

[H20WKD]

Have used both MarineTex and epoxy resin mixed with wood flour.