Four blades on a Viking

[outasite]

288968Anyone know of a four blade wheel that would work well on a light Viking,Now turning 28 off shore,and 30 cleaver @74-7600 Would like to try a nice smooth four blade.

[dnelson964]

Try and find a Spinelli DR4 (Drag) in 28-30 pitch. Mazco RE4 is similar...

[Kcraft]

We have a buddy up here "Chris" that runs a V King with a 300xs on her and he runs a 32" 4 blade Hump Back Cleaver @ 104-105mph … Another buddy put my 30 4 blade hump back on his Valero and I couldn't get it back so I had to sell it too him… LoL

[Fulltilt]

4 blade drag cut worked good on mine.

Really great acceleration.

[rev.ronnie]

Mazco RE 4 or a Hoss (they have a new 4 blade)

if they cut it for your application, they can tune it for a little less lift on your light hull.

[outasite]

Thanks everyone,was hopeing that maybe there was one four blade prop,that was the "go to wheel" for the Viking.You know,the magic bullet.I should have known better,It sounds like there are a number of them that can be made to perform well.Looking for a strong bottom end,good mid range.and still get it done on the top end.My Steve Smith 28 OS cut,does a pretty good job,but a little to much bow lift.And as usual the 30 cleaver rocks on top,but sucks under 70

[rkmirage]

Not sure how it would do on a Vking, but I ran a 4 blade turbo on my Vector, 3 blades are always going to be better on top end, but that cheap turbo 4 blade was very smooth and the cruising milage was great!