Fuel Return Line

[tony97gt]

Looking to run some fuel return line for my 280's I'm dropping on. Trying to find the blue stuff. Would -4AN blue push lock be a good suggestion? Not really sure how the -4AN stuff compares to .25". Sorry for my ignorance, just learning some of this stuff.

Found this stuff on JEGS http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Push-Loc-Hose/764426/10002/-1

[RichS]

"-#" is hose size in 1/16" so -4 is 1/4", -6 is 3/8", etc. -4 is good for the return line.

[tony97gt]

Awesome, thx!

[tony97gt]

Ended up buying and installing about 22ft of Aeroquip socketless push lock 1/4" black hose for the return line. Thx again.

[Liberator*21]

You might want to keep a close eye on that hose if its not EPA approved for use with ethanol blend fuels, it'll delaminate internally (you'll never see it happen) and really screw up your fuel system, or better yet if you can get it, straight fuel (no E10).

[tony97gt]

When I asked the guy at the counter he said it was ok so I'm assuming it is. However, I run rec fuel as well without ethanol. But thx for the info I will monitor it.

[Liberator*21]

:thumbsup: