Best prop for 22 talon -300 ProXS- 10 inch jack ??

[eeo]

Have been running 14.5x28 Pro ET and it runs pretty good, Found a 2 inch crack in one blade and a silver dollar size chip out of another this morning! Any thoughts on a better running prop for this set up ? Or best repair shop ?? Thanks

[leading edge propeller]

Have been running 14.5x28 Pro ET and it runs pretty good, Found a 2 inch crack in one blade and a silver dollar size chip out of another this morning! Any thoughts on a better running prop for this set up ? Or best repair shop ?? ThanksWe have several 22 Talon's in the area that i have worked with and have found the 4 blades like the pro ET work really well all around, if you can keep blades on them, I worked a 30p chopper 2 for a 22 with a 300X and it ran between 104 & 108 MPH. I have had good luck repairing cracks in thin drag props as well as many others but the pro ET's you never know, the repair may hold fine with no problem or another blade may crack, it all depends on the metal. I would be happy to take a look at it for you and let you know what i think or answer any questions. Thanks Rich.
941-720-0710
[email protected]

[Greggw/2g's]

I don't know what prop will work best on a Talon but a 32p ET worked best on my Hydrostream Voyager. I found a crack in one blade and had it repaired. Blade held on for about 10 miles and then broke off at about 50mph and yes took a nice chunk of the lower unit with it. I am running the new 31p Pro Max and it very similar to the ET. Running about the same top end and hole shot is better. Let see if it lasts.

[eeo]

Had a few prop guys look at it and they all said its a paper weight ! The crack is not the problem its the missing piece in the other blade . Gonna start from scratch. Any recommendations ?? The pro et was fine but if theres another that may run better id love to know, I normally travel w 50 gallons of fuel and four responsible adults ! Or are they asponsible redults ? Heeelp pls