Chattahoochee Roll Call

[onerew1]

Southern Outlaw Dragboat Series
Chattahoochee Thunder 800ft Drags
Saturday Aug.10th, Chattahoochee, Fla.

Less than a month to go!

I'd like to get an idea of who is coming to race.
I also need a ruff count of who is planing to be around on Fri. The City has offered to feed those that are around. I don't know what but none the less, its food.
The course start and finish buoys will be out by mid afternoon on Friday as well as scales for those that need it.

Here is what I've come up with on the Nostalgia Class rules

1990 and earlier hull<o:p></o:p>
Vessel configured to seat 3 or more, seats must be oem or oem like.<o:p></o:p>
No trim timers/computers, 12 volt trim only.<o:p></o:p>
Trim control buttons must be on the wheel, blinker style actuators allowed.<o:p></o:p>
Foot throttle mandatory. <o:p></o:p>
Dual cable or dual ride guide manditory, high performance hydraulic steering allowed. <o:p></o:p>
Low water pick up allowed, nose cone allowed. <o:p></o:p>
15" minimum midsection. <o:p></o:p>
V-6 Pro motor combo 1325lbs minimum weight unless 7 petal motor, then 1400lbs.<o:p></o:p>
OMC,Yamaha and Suzuki allowed at 2.7L or smaller.<o:p></o:p>

Hotels
Seminole Lodge
2360 Legion Rd
Sneads, Fla.
850-593-6886
$50 a nite including tax

Lake Seminole Inn
$45 nite plus tax for a king
$50 nite plus tax for 2 bed

Relax Inn
Same as Lk Seminole Inn
They are the same owners. So 850-593-6158 for both.

Come on out and enjoy the day with us and help a great cause. Proceeds from this event will go to The Boys and Girls Club of the Big Bend. These guys are doing some great stuff for kids in the area.
www.southernoutlawdragboatseries.com (http://www.southernoutlawdragboatseries.com)
850-491-3316

[Billy C]

V-6 Pro

[Laser LTV]

River Racer

[AlanButts]

is this an ODBA , DSRA or other ?

[onerew1]

Other, Southern Outlaw Dragboat Series
www.southernoutlawseries.com
REW


is this an ODBA , DSRA or other ?

[onerew1]

Here is what I've come up with on the "Nostalgia Class".
1990 and earlier hull<o:p></o:p>
Vessel configured to seat 3 or more, seats must be oem or oem like.<o:p></o:p>
No trim timers/computers, 12 volt trim only.<o:p></o:p>
Trim control buttons must be on the wheel, blinker style actuators allowed.<o:p></o:p>
Foot throttle mandatory. <o:p></o:p>
Dual cable or dual ride guide manditory, high performance hydraulic steering allowed. <o:p></o:p>
Low water pick up allowed, nose cone allowed. <o:p></o:p>
15" minimum midsection. <o:p></o:p>
V-6 Pro motor combo 1325lbs minimum weight unless 7 petal motor, then 1400lbs.<o:p></o:p>
OMC,Yamaha and Suzuki allowed at 2.7L or smaller.<o:p></o:p>

[Billy C]

Donnie Foster in river racer

[onerew1]

Ok, I was at the lake this past weekend and I have to say I was a little worried about the water level. However, after talking to a couple of people in Chattahoochee, seems the river level is fine and going to be fine for the race. With that said, lets see who is coming, post 'em up. REW

[gambler2]

so who's racing? and staying where? i'm in for bass and ski, maybe river racer or pro mod

[Laser LTV]

A lot nicer motels and restaurants 30 min north in bainbridge.

[onerew1]

Thanks Laser, can you post some of 'em. I've got the Chattahoochee and Sneads ones posted.
Me and Tom (Nervous Mother) in River Racer. Possibly McIntosh.

REW

[timmc6]

don't forget jack wingates lots of parking,tim

[Laser LTV]

don't forget jack wingates lots of parking,tim
I heard the kitchen is closed now.

[Laser LTV]

Thanks Laser, can you post some of 'em. I've got the Chattahoochee and Sneads ones posted.
Me and Tom (Nervous Mother) in River Racer. Possibly McIntosh.

REWCharter House, Jameson Inn, and a Holiday Inn Express for those that feel lucky!!!! Nice food close by too. River Racer with the Lloyd Burns special!!!!!

[jay j]

Billy C gonna run my Ventura in Nostalgia, heard some from Sop Choppy coming also been quiet but have had some calls wanting to show up unannounced.Sounds like some good racing is going to happen.

[TMc]

Hey Rew or Jay can yall post all the rules over on the web site for easy reference.
Also if our luck holds up and we don't break anything this week Shawn Floyd will be there in Nostalgia with the Vector and ProDrag with the STV.

[onerew1]

Here ya go.
REW

River Racer
[/U]Any boat originally configured to seat 3 or more
No full on drag hulls
Any motor configuration, midsections 15” and above
No alcohol
No Nitrous
2.7 liter and below - Minimum weight 1325 lbs.
2.8 liter and above – Minimum weight 1425 lbs.
All V-8 motors 1525 lbs.
Compression limited to 150 lbs.

V-6 Pro
Any type hull allowed
Only Pro Max motors or Black motors allowed. Steel or chrome bores only, no Nicasil, no high performance Nicasil motors allowed except for 2.4 liter motors.
All 2.4 liter are allowed unlimited compression.
2.5 steel sleeved, carbureted motors are allowed unlimited compression.
XRI injected motors with stock setup is allowed up to 185 psi of compression.
SVS or alteration to stock setup is allowed up to 165 psi of compression.
2.7 liter and below are allowed a minimum weight of 1325 lbs.
Midsections must be 15” or more.

Pro MOD
Any hull type is allowed.
Any motor combination
15” or above midsections allowed.
No alcohol or nitrous allowed.
2.7 liter and below, minimum weight of 1325lbs.
2.8 liter and above, minimum weight of 1425lbs.
All V-8 motors, minimum weight of 1525 lbs.

Bass and Ski
Any hull originally configured to seat three (3) or more.
Any motor combination
No alcohol or nitrous allowed.
2.7 liter and below, minimum weight of 1600 lbs.
2.8 liter and above, a minimum weight of 1700 lbs.
All V-8 motors, minimum weight of 1900 lbs.

Pro Drag
Any hull type allowed.
Any motor combination allowed.
Alcohol allowed.
No nitrous allowed.
No minimum weight requirement.

Unlimited
Any hull type allowed.
Any motor combination allowed.
Any fuel allowed.
Nitrous allowed.
No minimum weight requirement.

Pro Max Bass and Ski
Any hull originally configured to seat three (3) or more
V-6 Pro motor combinations and motors
2.7 liter and below 1600 lbs.
2.8 liter and above 1700 lbs.
V-8 motors 1800 lbs.
All motors must use a stock outboard ignition system
No aftermarket type ignitions allowed
No hi-performance nic blocks allowed except for 2.4
All motors must use steel sleeves except for 2.4 or 2.0 blocks
Laser style injection only except for 2.4 motors not conforming to V-6 Pro combos must add 35 lbs.[/B]