CaptainJohnnysWorld
04-11-2013, 10:10 PM
I finally pulled my boat to the house on Saturday and have put in 60 hrs into finishing the restoration. I pulled the carbs and intake and put in Boyesen Power Reeds. I had already bought them before I started using CCMS reeds on other projects ( forgive me Chris). I decided to pull the heads after I got it all back together and sure as sh*t 5 head bolts snapped. So now I am in a pickle. I drilled them out to almost nothing and no extractor made can pull them out. I am going to continue tomorrow on my mission. Any suggestions?
I am also wondering since I have the heads off now what can I do to get more power out of this 115 and what it will take to make it a 130hp. How far can I have the heads milled to get 145+psi? I run 93 octane Premix with Klotz Octane booster. Any help or tricks of the trade will be greatly appreciated.
Thanks guys!
I am also wondering since I have the heads off now what can I do to get more power out of this 115 and what it will take to make it a 130hp. How far can I have the heads milled to get 145+psi? I run 93 octane Premix with Klotz Octane booster. Any help or tricks of the trade will be greatly appreciated.
Thanks guys!