3 liter Nitrous

[crimeinc2]

With all things done correct and using a quality kit what is the biggest shot of nitrous a stock 300x can handle safley? The factory cast pistons seem to be the weakest link to me.

[Capt.Insane-o]

Not much with the stock rods.

[malexie]

I have a 100hp shot on mine with forged pistons.
But I only got it to turn 8600rpm's so far.

[Chaz]

It's always a good idea to start small and establish a Nitrous / Fuel ratio and timing map that provides for a clean trouble free tune-up. From there it becomes easy to add anywhere between 30 to 50% increase to the base power level.

[Liberator*21]

It's always a good idea to start small and establish a Nitrous / Fuel ratio and timing map that provides for a clean trouble free tune-up. From there it becomes easy to add anywhere between 30 to 50% increase to the base power level.

Chaz,

:iagree: Great words of wisdom there........:thumbsup::thumbsup::thumbsup::thumbsup:.....tread lightly and take little steps.....or KA-BOOM !!!!!!!

[cali kid]

Chaz,

:iagree: Great words of wisdom there........:thumbsup::thumbsup::thumbsup::thumbsup:.....tread lightly and take little steps.....or KA-BOOM !!!!!!!
3.0 litres engines don't like nitrous.Can't retard the timing easily.Make a bracket to set the crank sensor back 5 degrees.Maybe your motor will have a chance.

[allison8503]

You don't have to retard the timing, you can compensate that with good fuel and plenty of it.