PDA

View Full Version : Hydrostream Volcan



redgambler
10-26-2011, 07:19 PM
What kinda set back you run on a Volcan? Haven trouble with the bow lift could be prop dont know.

Speed Sr.
10-26-2011, 10:00 PM
Volcan? Please put a photo up! :)

panther150
10-26-2011, 11:03 PM
Volero maybe? how many feet long is it?

Steve

BUSHWACKER
10-27-2011, 02:50 AM
www.hydrostream.org gives model names and lengths and alot of good info too.
Alot more info is also needed to have people help ya eng brand/size, tank size /location, jackplate size, prop height, prop size/pitch, material it made of, what steering sytem etc etc
Mite be a Vulcan, if thats it in his avatar note 4 wheel trailer and his English may off some look where he is from, Des Allemands????
See if it has serial numbers on the transom or a plate or sticker on the dash and post them.

rev.ronnie
10-27-2011, 06:21 AM
Vulture?

panther150
10-27-2011, 07:25 AM
thats a gambler fishing boat in his avitar I think.

redgambler
10-27-2011, 09:10 AM
Well that's what I thought he called it. It is 20'. Don't have pictures, but I can probably take some this weekend. I need to change that aviator been a long time sence I changed from that Gambler. I will look at the stream sight and try to get the right name.
U

redgambler
10-27-2011, 09:23 AM
He had 17" which I think might be to much, 150 HP which I know isn't enough. 2 to 1 bobs. 28" Merc. Chopper out the box which I know is to big, gonna put at 24" chopper on it tonight if not to windy with 10" of setback. Tank has never had more than 8 gal. I'm just trying to help the guy out. Thanks. My 24" chopper has a lot of cup and that run ought to help out some on which way to go. Almost split shaft. It is a Vulture.

Jamescole
10-28-2011, 12:37 PM
The Vultures need tons of power or tons of setback to get them flying ( i have only read) .. there's lots of info on hydrostream.org. i have always wanted one !!

redgambler
10-28-2011, 03:20 PM
Thanks jamescole.