EGT Gage

[rude tim]

Is there a EGT Gage set up that you can run 8 separate temp probes to that will only show the hottest cylinder? I am looking for a way to have a warning light arrangement for a lake motor.

[PanRonnie]

something like this ? but you will have to get the dash also

245339
http://www.powertraincontrolsolutions.com/egt.php


245341
http://www.powertraincontrolsolutions.com/datalogging.php

245343
http://www.altronicsinc.com/pages/redalert.html


but are you sure you need 8 i,m quite happy with 2
<iframe width="640" height="360" src="http://www.youtube.com/embed/DpkBPE53PTk" frameborder="0" allowfullscreen></iframe>

[riverboater]

Egt's are good still need to read plugs
Egt's high could be reading rich/ flame

[Liberator*21]

Egt's are good still need to read plugs
Egt's high could be reading rich/ flame

:iagree: Good valid point as my high temps are caused by reading some of the flame at WOT because of location.

[rude tim]

The goal is to activate the primer when a cylinder reaches a set point that I input. I under stand reading plugs and piston crowns for proper jetting. This is for a safety only. Just a thought.

[PanRonnie]

this does not create a banking crisis

245435
http://www.aircraftspruce.com/catalog/inpages/1105699.php

[rude tim]

Thanks guys.

[Teddy G]

That is COOL as HELL!!!!!
I'm going to get one.

Wonder how much putting 12 EGT probes in is gonna set me back?



this does not create a banking crisis

245435
http://www.aircraftspruce.com/catalog/inpages/1105699.php