injector blanks?

[850cc racer]

Hi Guys, posting for a friend, i believe there is a plug or blank available if converting a crankcase injected EFI engine to carbs?

can anyone point me where to get them?

thanks
Rob

[850cc racer]

we have seen these on a mad efi set up.. ? cant see anything on the mad website?

[jphii]

http://injector.com/cart/pc/Aluminum-Injector-Bung-Part-No-0901-10p57.htm

[850cc racer]

Hey mate appreciate the reply. From what I see there that's more to move the injectors to another spot? I was more looking for something to plug the hole where the injector is now so I can Just run carbs..

Thanks

[M. HARDEE]

Unless you find a set mad use to machine u will have to machine set OR USE 1/8 brass PIPE PLUGS IN THE SMALL HOLE ---IF engine is assembled --- put piston down on cyl and put air at spart plug on same cly and run 1/8 tap ( THREE OR FOUR TURNS) (not a lot of thickness here so don't run tap very deep) in injector hole . AIR WILL KEEP SHAVING FROM ENTERING CRANKCASE ---(WEAR safety glasses or shaving may enter eyes ) put loctite or flange sealer ON THREAD PIPE PLUG threads and snug ---can take plugs outand go back with injectors at later date if need . cheap and quick . Mitch