83 johnson gt150 wiring harness pinout

[rally996]

ok so i need to know the pinout of an omc harness ignition switch side of harness. last owner cut wires from shifter and removed it putting in a rex marine 3 position shifter need to know if i need a nutral switch or not and what those wire colors are and what the rest of them are a simple red=blank ect. will work or a wiring diagram is fine too any help willl be greatly appriciated

[racer]

Red is battery, black is ground, black/yellow is kill, yellow/red is start, purple is keyed power, purple/white is choke

[rally996]

ok well there are a whole lot more wires hangin out of the harness than that but that will get me started does it have a neutral circuit that limits rpm or is it just a starter signal interupter

[racer]

Just starter signal. Sorry I only mentioned key wires, Grey is the tack lead, tan is hot horn, white/tan is trim gauge but should be in a seperate harness with a black, red, green, and blue

[rally996]

ok thanks will work on that tom after work i do remember seein red green and blue loomed together guessin that is the trim harness prob just got taped to yhe other harness

[nymack66]

Here you go hope this helps ...