swivel pin bushings

[speedinstream]

The pin that the mid pivots on for steering on the clamp bracket.I need the upper and lower bushings are they all the same for all v6 mercs.Also part# if anybody knows thanks.

[Petezap]

Part numbers check here

www.crowleymarine.com (http://www.crowleymarine.com)

[mach351]

They are different between a standard mid and a 15" offshore. What kind of mid ya got?

[speedinstream]

They are different between a standard mid and a 15" offshore. What kind of mid ya got?The one i'm working on is a older cut 15'' single ram

[mach351]

Yea that's what I got - just did mine recently. Any v6 should work. Check out BAM Marines website for microfiche to get your part numbers - that's where I got mine. If it's a cut saddle you might not have a bottom stock bushings anymore. My mid was cut by Marty Powell and he installs a bronze bushing in the bottom that doesn't really go bad. On the top make sure you get the bushing, spacer, seal, and new wave washer - the parts are cheap and should be done while your in there.

[speedinstream]

Yea that's what I got - just did mine recently. Any v6 should work. Check out BAM Marines website for microfiche to get your part numbers - that's where I got mine. If it's a cut saddle you might not have a bottom stock bushings anymore. My mid was cut by Marty Powell and he installs a bronze bushing in the bottom that doesn't really go bad. On the top make sure you get the bushing, spacer, seal, and new wave washer - the parts are cheap and should be done while your in there.Ok thanks i will check them out.I dont no who cut the mid but the play does all seem to be in the top.Are you runnin the 15'' on your stv is your transom cut or do you have a jackplate?I am looking for one have it listed in parts wanted.I talked to hydrodynamics and he is backed up 2 months.thanks for the info and help.

[mach351]

I cut my transom

[Tomanytoys]

Ok thanks i will check them out.I dont no who cut the mid but the play does all seem to be in the top.Are you runnin the 15'' on your stv is your transom cut or do you have a jackplate?I am looking for one have it listed in parts wanted.I talked to hydrodynamics and he is backed up 2 months.thanks for the info and help.

I think I saw a hydrodynamics jackplate for sale on FastBoatsCanada.

[speedinstream]

I think I saw a hydrodynamics jackplate for sale on FastBoatsCanada.
Thanks i will check it out do you have to be a member to veiw there bu and sell?

[Tomanytoys]

Thanks i will check it out do you have to be a member to veiw there bu and sell?

I think so.
I posted that there was someone here looking for one. He may come looking for you.
Happy hunting.

[speedinstream]

I think so.
I posted that there was someone here looking for one. He may come looking for you.
Happy hunting.Thanks for the help.

[afr]

randy i sent ya a pm i need these to for the regular mid