part #

[AlanButts]

9692803 can anyone help identify , or verify thanks

[flabum1017]

turbo impeller for a Cummins 8.3QSM.........

[Dave Strong]

What it is supposed to be?

Dave

[AlanButts]

i took it from a powerhead but can't seem to match it up , dated 10 96 i think it was a long block replacement , but wanted to see if members could verify that

[HStream1]

turbo impeller for a Cummins 8.3QSM.........

:icon_bs:It's a framastat off a CL-19 firing valve on a 688 class fast attack submarine.


Seriousely though Alan. Exactly where did you (location) get the number from? If it is a serial number it doesn't correspond with a 96 block as from 1986 on used letter designators as a prefix to the numbers..

[AlanButts]

behind the timing arm , it dos'nt match any of my 260s and we cant find the number in any reference . I pulled a cylinder head and from a quick look it appears to be a virgin 260 block all nick no port work , but the owner swears its a drag , im guessing it was a complete drag that popped a powerhead and was replaced with a 260 long block and never finished , the swivel number tag reads void void void , the owner wants to bring it to me to finish it, its missing injectors and alot of wiring it dose have an a63 box and the correct regulator , but somethings up , looks like some one fell out with a mechanic and took it away unfinished

[HStream1]

behind the timing arm , it dos'nt match any of my 260s and we cant find the number in any reference . I pulled a cylinder head and from a quick look it appears to be a virgin 260 block all nick no port work , but the owner swears its a drag , im guessing it was a complete drag that popped a powerhead and was replaced with a 260 long block and never finished , the swivel number tag reads void void void , the owner wants to bring it to me to finish it, its missing injectors and alot of wiring it dose have an a63 box and the correct regulator , but somethings up , looks like some one fell out with a mechanic and took it away unfinished


I agree that number doesn't come up as any legit part number. it also doesn't correspond with any 260 I am aware of. Your assumptions are most likely right on. Have you measured the port maping yet? If you don't have one PM me your e-mail and I'll send you one.

[h2oskiier30]

Illudium Q-36 Space Modulator

[AlanButts]

Illudium Q-36 Space Modulator

nope i even cross refferenced then too , but i hope you are getting some good use of that 2.4 nowdays

[patchesII]

You could pull the divider plate and tell whether its a 260 or Drag

[Dave Strong]

Maybe a service replacement block?


Dave

[AlanButts]

[QUOTE=Dave Strong;2034059]Maybe a service replacement block?Dave[/QU
OTE]
yeah thats kinda my gut feeling , but if he drops it off in the am . it'll take about 5 minuates with a caliper and scale rule to tell what he's got, hope he's not to broken up by the truth, :confused:

[AlanButts]

its an early drag