Looking for pictures and dimensions - Hydrostream Vegas/venus back seat

[hydrohellion]

Hi guys, working on my first boat, it needs a new interior. It's a hydrostream venus, and it came without a bottom part of the back seat.

Just hoping someone could measure the piece of ply and post the dimensions. Also some pics of the seat and the base/floor would be very helpful

thanks for any help

Kev

[hydrohellion]

anyone??

[venusxt21]

Please help. Just got a Venus with the same problem.
Thanks, Chuck.

[imq707s]

I just redid the interior in my Vegas XT a few months ago. I will measure up the back seat when I get home tonight. If you need more pics, let me know. I can post up some more tonight.


http://i208.photobucket.com/albums/bb241/iqraceworks/Random/IMG_0898s.jpg

http://i208.photobucket.com/albums/bb241/iqraceworks/Random/IMG_0581.jpg

[imq707s]

The seat "bottom" has a piece of plywood (5/8" I think) that is 54"x18".

The seat "back" has a piece of plywood (5/8" I think) that is 53"x20". There is a longer piece on the seat back that actually extents down into the frame to lock the seat in to the base. And there is a a wood ledge that is on the top of the seat back that kind of curls over the back.

The next time I have the cover off of it I'll take some good pics of the base and how it all goes together. I'm sure there are other ways to do it....but mines still set up the way the factory did it (although I did rebuild the frame with some better wood".

Hope that helps a little.

[venusxt21]

Tanks Ian,
The Venus must be a little different, the piece I have is 53"x16 1/2". I think it is the bottom. Pictures and dimensions of the base would help though, I could build something similar.
Hey Kev what are the dimensions of the back?