View Full Version : Quick spark plug question
18ftswitzer
07-06-2010, 10:48 PM
I have a 95' merc 225, the plugs that ngk and mercury list are BUZHW. the plugs in my boat are BUZ8H or something like that. What should I use?
Tom Foley
07-07-2010, 03:34 AM
Buzhw , they work just fine , easy to clean .
Jay Smith
07-07-2010, 06:45 AM
Try an NGK BR8HS gapped at .035" good plug and way cheaper and easier to find..
my .02
Jay
Sheer Insanity
07-07-2010, 07:22 AM
Try an NGK BR8HS gapped at .035" good plug and way cheaper and easier to find..
my .02
Jay
I agree. They cost around 2 bucks retail and with a 10 dollar plug you cant tell a differance in performance. I change mine everytime my motor gets hard to start.
18ftswitzer
07-07-2010, 07:57 AM
Thanks for the replies. I already ordered the plugs from work, so they were $45. Im going to get some BR8HS plugs for next time though. The plugs in the engine are the wrong plugs and it loads up in the channels, so I figured I would throw in a new set.
modvp
07-07-2010, 08:14 AM
NGK BR8HS:
http://www.ngk.com/results_appOther.asp?otherMotiveID=218180&mfid=1
Sheer Insanity
07-07-2010, 05:50 PM
:thumbsup:Advance auto also carries BR8HS plugs. I think I paid under 2 bucks each last time there.
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.