what do I have here?

[spearhunter7]

my lower on my 2.4 200 went out, so I found 2 on craigs list for $300 so went to go get them and when i got there this is what I got. I think its a 260 block whit efi horn intake plate reeds front half and block 1 head cdi box coils and plug wires injectors fuel rail adapter plate 2 pistons and the lowers for $300 I was wondering if any thing would go on my 2.4 200 to improve it if not what is this stuff worth? here is some pics
http://i199.photobucket.com/albums/aa155/j4x400/Picture003-1.jpghttp://i199.photobucket.com/albums/aa155/j4x400/Picture004-1.jpghttp://i199.photobucket.com/albums/aa155/j4x400/Picture001-1.jpghttp://i199.photobucket.com/albums/aa155/j4x400/Picture002-1.jpghttp://i199.photobucket.com/albums/aa155/j4x400/Picture008.jpghttp://i199.photobucket.com/albums/aa155/j4x400/Picture002-1.jpg

[fyremanbil]

Looks like a 2.4 bridgeport. You can probably get about $300 for the engine parts and keep the gearcases.

[spearhunter7]

if its a 2.4 bridge port then could I use the efi on my 2.4 if I got a ecu?

[fyremanbil]

It will bolt up, but don't know what ecu to use or if the fuel curve would be correct for a non bridgeport.

[DerStream]

Definetly a Bridgeport, you could see in the picture with the block the bridge in the exhaust port, also the pistons you have laying the the bed are 2.4 pistons & you can also see the finger port. in the picture with the damage.

Good stuff get it fixed, and slap it together, you probebly have enough stuff to put it together between you 2.4 200 & the miscl parts for sale on here you can have your self a good motor.

[DerStream]

But then again the exhaust divider on the tailgate looks like a 1 piece.