mariner injection oiler

[eddie baird]

how do i change this to just a premix do i have to block something off help im lost eddie

[eddie baird]

and one more thing are most of you big boys who are so fast what way do u all go mix or injection thanks eddie

[RB in NM]

The oil pump assembly is on the side of the engine, there's a shaft behind it being rotated off a crank located plastic gear , pull the pump, and shaft, block off the opening. do a search for it on here, there's plenty of threads and good info on the topic. Jay Smith sells a block off kit I think. The oiler is good on a stock motor spinning stock rpms, much over 7k and they tend to do bad things,, the older the motor, the more apt it'll go out, best piece of mind is to pull the pump and premix @ 32:1 or 40:1.

RB