Mercury lower unit 1647-9147-C1

[cactusth]

Does anybody know what is suppose to be the correct part numbers for a 1:87 gear set with casting number 1647-9147-c1 on the lower unit.

[TEXAS20225]

if Mercury 1.87 forward and pinion come as a set 43-44104 with 43-824986 as reverse

[cactusth]

Thanks for the helping. I was coming up with something close to that. Is gear set 43-44104A7, 43-44104A8, and what you said all the same gear set as for as the forward and pinion set. GLM 11450 gears refer to 43-44104A8. I'm not sure if these are good or not but was thinking of using them instead of mercury cuz they cheaper. Any thoughts on them?

[TEXAS20225]

they are good parts just make sure you hold the forward gear lash to spec and pinion height . lash is .0018 to.0026, pinion.0025 thousandths they will last as long as any of them

[cactusth]

So basically all three numbers are the same gear set? The housing also has a cracked bearing carrier. I'm coming up with 848840A1. According to the net those numbers for that carrier fit into the CLE, Sport, torque masters all under my motors serial number. I think that carrier number will fit in my lower unit too right?

[TEXAS20225]

that is a 1 1/4 dia propshaft number that case number has no connection to CLE Sporty or Torqmaster carriers? you must have a Promax for this to be pulling up, the case number you stated was a fishing motor case 2.1 and 1.87

[cactusth]

Yes that is correct. I do have a promax, well really a Mariner super mag same thing. When I got the motor, the lower unit had been changed out. I would perfer the one that came with it but that is how it came. The lower unit I have now has been sent to Bobs for the nose cone then sent back. So now I'm in search for the correct carrier number for the lower unit. Those carrier numbers I stated were looked up under the super mag. Its hard to find out correct part numbers with just a casting number on the lower unit. I could not find the part number on the carrier but found a casting number and it is 818954-c Nothing seems to come up on the net when google searcing that casting number.

[TEXAS20225]

for standard carrier is 43567T 1 however if your gonna surface the prop i would recommend installing a 3.0 carrier part number 818763A10 it is cheaper and twice as heavy same small size prop shaft hope this helps:thumbsup:

[cactusth]

Man, that is great info, Did not realize the 3.0 carriers would fit in its place. Thanks for all the info. Have a Merry Christmas.

[TEXAS20225]

You Are welcome PS Sweet looking Mota i have a Pmax too but them Mariner Cowlings are really cool:thumbsup::thumbsup::thumbsup:

[DAVEO]

Thanks for the helping. I was coming up with something close to that. Is gear set 43-44104A7, 43-44104A8, and what you said all the same gear set as for as the forward and pinion set. GLM 11450 gears refer to 43-44104A8. I'm not sure if these are good or not but was thinking of using them instead of mercury cuz they cheaper. Any thoughts on them?
So what is the differance between the 44104A7 and the 44104A8 gear set?

[luv2gofast]

So what is the differance between the 44104A7 and the 44104A8 gear set?

I am trying to figure this out also. Both 1.87:1 but the A7 is specified for the Sporty and a bunch more money???????

[pappa pete]

Make sure the 3.0 carrier has the keyway slot because they have with and without you need the keyway, ask me how I found out. Lol