trim gauge not reading right

[rbodine]

I just swapped my yammi 150 for a 250 and my trim gauge now reads all the way up? I is reading (5) 1-5 scale when the motor is all the way down. The motor new motor plugged right in to all the same plugs, i didnt have to change anything. Any body got any ideas?

[Ranger976]

right off... I think yammi's have an adjustable trim pot in the clamp section so you can get it right....don't qoute me....some of the yammi group should chime in....give it some time

[samari]

Look at the center of the tilt tube, there is a plastic clamp with a dinger sticking out that actuates the trim sender. They brake often and have been updated with a metal one.

[rbodine]

looked yesterday, it is not broken and moves freely

[Superbender]

how many wire trim sender do both motors have 2or 3 /settin to change in back of tach:thumbsup:

[rbodine]

I will look at the back of the tach tonight, thanks eric