Will this prop fit my outboard?

[Air Dog]

I am installing a 1988 70hp Johnson outboard with a standard 20" shaft onto a 13.5' Jaguar Tunnel boat.

I am thinking I want to run a 21p (4) blade stainless prop.

The one I found has these numbers on it: 176196

Prop size is 13 x 1/4 x 21

The spline as 13 notches.

Apparently it came off of a 115 Johnson.

Will it fit my 70? :confused:

Thanks,

:)

[Air Dog]

Not even a guess?

:confused:

[mr_velocity]

Going to be very tight if it fits. Just measured mine, I'm running a nitro lower on my stinger with a 12 7/8 4 blade have just about 1/4" of clearence left.

[ROLF]

I have removed the tourque tab plate on these gear cases to clear some props.

[Air Dog]

Thanks for the replies.

Sounds like it may not work.

Bummer

[Air Dog]

I passed on that prop as I didn't want to waste money on something that wouldn't fit.

Any ideas on what size prop would be best?

Boat is a 13.5 tunnel hull.

Make is a Jaguar, but I have seen similar boats called kid marine or kidd marine.

Looks like a fun cat or a big baha scat cat.

Running a 1988 Johnson (OMC) 70 hp stock engine.

I am thinking I want a 21p (4) blade prop but I would love some input.

Here is a pic of the boat.