PDA

View Full Version : OMC Tech looper questions



overdrivecb
07-15-2009, 07:35 PM
92 gt w/2.7 heads (.695) (unplugged reliefs) late mdl intake 16* stock air box 26-i ,25-m, 64d 1-4..67d 5@6, mid bores(stock)

92 bullet 20v wot is 5800-6000 loaded to fish w/ 2 over 270

i noticed that the fiber reeds must not be sealing it is blowing comp. back through the carbs on 2 and 6( not super bad but i can feel it). is it really worth the $$$ to go back with fiber or put in the steel reeds i would like to go back to steel so i could lean it out at idle cause it loads up real bad now

(its a little fat on the mains now)

always run premium

plug the reliefs or dont?

its a fishin boat but always looking for more

baja200merk
07-15-2009, 08:59 PM
do the typical synk and link, might surprise you on the idle issue

my fiber reeds are 4yrs old

64 on 1-4 sounds lean to me air box must be your saving grace... i would fatten it up and pull the air box.

overdrivecb
07-16-2009, 02:24 PM
i did the lync and sync by the manual took off the box fired it upand thats when i noticed the reed issue

jphii
07-16-2009, 02:27 PM
I'd put the steel reeds back in it.