I was thinking about buying this....

[Ospreyproduction]

......but it had little hop around 130 MPH:D:D:D




<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/212f95whyKk&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/212f95whyKk&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[Ospreyproduction]

I do like the color though:thumbsup:





:iagree:

[WATERWINGS]

Yea, bouncin pizziz me off ! (Vector, for instance with a V-6)

That turbin boat had a pretty bad bounce to me, (in an irritating way), I would want that worked on.

[GDM]

.

that thing is so bad azz



:cheers:

[patchesII]

somebody familiar with the big offshores clue me in as to what you do to stop it from porpoising. that would get annoying

[tux974]

Yes, I also hate when those Skaters hop at 130+ :mad::D :) Nothing alittle more power wouldn't correct ;):thumbsup:

[georgiariverrat]

...It's got a deck big enough to have a square dance on :D
I agree with Lee, Cool Colors!!:thumbsup::thumbsup::thumbsup::thumbsup:

[Fish]

could be the only boat you have not owned.... yet.:thumbsup:

[Rodney Nance]

The only things we will do is put a white stripe across the deck and down both sides. Three UT logos and we are there.:thumbsup:

[Jetboat Jared]

**** throw a confederet flag on the deck and 01 on the side and you got the generalee of the water lol

[The Big Al]

reminds me of this video.

my favorite!

http://www.youtube.com/watch?v=E_SAFjARlMc</EMBED>

[Pad driver]

Turbine exhaust may be pushing the back of the boat down a bit and proposing on the chine breaks. Might try turning the exhaust straight back with an elbow. If your not using clever props, that would be my first option.

[Ospreyproduction]

Turbine exhaust may be pushing the back of the boat down a bit and proposing on the chine breaks. Might try turning the exhaust straight back with an elbow. If your not using clever props, that would be my first option.

.....Thanks, I'll give it a try. Damn turbine exhaust screwing my ride up. Wonder if I can get some 90 turns for the exhaust???:D:D:D

[PARKER RABE]

that boat used to be in a shop , about 1 mile from me ....tom argue painted it .hes the one who painted my impala

[mr fun]

from a piss ant no nothin. ready? it needs to have some weight moved foreward. betcha anything. :iagree: (after many years of scootin over h2o, that was of the first lessons I learned.) If your serious about it, I'll be over here holdin my breath :D I know of a feller up the road from you w/single 28's turbine powered for about a mil less :cool: fun out :thumbsup:

[Backfire]

From the looks of the trim tabs- they are up-all you would need to do is bump them down a touch or two to take out the gentle porpoise.
Backfire ;)

[Euroski]

I just want to see Chigger drive it! That would be interesting...

[mr fun]

From the looks of the trim tabs- they are up-all you would need to do is bump them down a touch or two to take out the gentle porpoise.
Backfire ;)

:iagree:

[Backfire]

Didn't say nail the nose. Just enough to level it out. Or lower the trim a touch. Aired out and smooth running would be faster I believe. However the water may have some low rollers, can't say from looking at the movie. With a load of drunk hard dicks, they will never notice.
Backfire ;)

[WOT RACING]

I have seen this boat in person at Tos shop and it B E A Utiful!!! Toms work is some of the best I have seen. The guy who owned that boat has a 28 skater now that is probably one of the nicest ones out there. Carbon Fiber everywhere!! Next time its at Toms Shop I will try and snag a pic or two for the S&Flyers....