YOYOKIDS from gramercy, LA is a deadbeat scammer!!!!! don't deal with him.

[bigtis]

I just drove 80+ miles to pick up a mota he described as fresh with 145 across all 6 holes. he assured me the mota was in perfect running condition and that he had recently rebuilt it with brand new pistons.

turns out that the mota had 2 bad holes, one hole having a cracked piston. and other holes makeing 165+ pounds of compression. how many people know of a mota that will make 20 more pounds of comression after sitting for 2 months:confused: It's people like YOYOboy who give this website a rap for being full of scamsters. once again, a nonteam member who can't support the site with 25 bucks would rather screw over a Supporting vendor on the site. I have 3 witnesses that are on this board as well that can vouche for the situation.

YOYO kids is a liar, and in my book, he tried to STEAL my $$$$$$$$ by purposely lying to me about what he was selling. just check all his recent post, bet they're deleted and on fastbass, you can't delete them only edit, why you think he did that:confused:


YOYOKIDS, make good by me with the offer I made to you, that's the only legit thing to do. Balls in your court now. Split the block and sent me pics of the crank to ensure it isn't hurt. And I want pics. your word means nothing to me. just like 145 across all 6. Yea right.

[yoyokidss]

you think i would sell a bad motor knowing you are bringing a compression guage???
i had no idea of it being bad. still was running strong when i took it off 2 days ago.

And my guage showed 145 two months ago. and the highest yours showed 150lb.

[Stoker1]

Sad. But on the bright side, you didn't get ripped off. Anyone else might not've been so keen as to inspect the engine as well as you did and dropped the cash on an unsuspecting engine. Lick your wounds and consider the fact that you're only out a little gas money & a few hours of your time. (gas is cheaper right?).

Merry Christmas.

[yoyokidss]

<HR style="COLOR: #72a5d8; BACKGROUND-COLOR: #72a5d8" SIZE=1> <!-- / icon and title --><!-- message -->
whatever you say randy..:rolleyes:

you think i would sell a motor knowing you are bringing a compression guage???
i had no idea of it being bad.

i deleted the post because your possie was busting my chops again.
i had no idea motor was like that. i ran it on sunday with no problem turning 6800 with my 28et. sold the boat on monday.comp check was taken 2 months ago when had a potential buyer.

pay me some money for the diesel i spent going look at you rig you ended up selling less than what i had to offer..

in my opinion a SUPPORTING VENDOR should be a legit working facility of a boat buisness, not a swap and sell guro.

Guys you can beleive what you want but i wouldnt have made anyone come this way if i knew it was bad.

[SnakeBit]

Bigtis Whats goin on?? Another Bill L!!! And in the Christmas season. I see in the Buy and Sell Forum that he responded that he did not know!!!:rolleyes: You are getting better at this though!! This time you caught the prick!!:smiletest:

[bigtis]

(since you copied & pasted, I'll do the same) :)

Sad. But on the bright side, you didn't get ripped off. Anyone else might not've been so keen as to inspect the engine as well as you did and dropped the cash on an unsuspecting engine. Lick your wounds and consider the fact that you're only out a little gas money & a few hours of your time. (gas is cheaper right?).

Merry Christmas. exactly, holiday season and he want's to rob someone.!!! it's all good. just the point of the matter. everyone, and I mean everyone needs to know about members like yoyoboy. Merry Christmas to ya!!!:cheers:


Bigtis Whats goin on?? Another Bill L!!! And in the Christmas season. I see in the Buy and Sell Forum that he responded that he did not know!!!:rolleyes: You are getting better at this though!! This time you caught the prick!!:smiletest: so it seems that way Snake. and in the christmas season indeed. he told me, I'll just part it out then and make more. BUT, it the mota was in that shape, what does the gearcase look like on the inside? I would've still got it if he came off the price. He assured me the crank was still good, yea right just like 145 across all 6:nonod:

Merry christmas snake.

[bigtis]

Sounds like we need more info on this one. You are accusing him of not being a paying member but I see a team member status beside his name so I see your story not being accurate which doesn't add up so who do we believe? Not choosing sides here but need to see original add. Sounds like you 2 have a history together? the team thing was recent, the mota purchase situation was yesterday. got 3 other snf'er who were with me. if you don't believe me, then you purchase the mota.

Riverrat, I've been through this already. and been ridiculed by members in a similur situation, to only be proven correct later on. I have no reason to lie, if it was what yoyo said it was it'd ba at my house right now, BOTTOM LINE!!!!!

No hard feelings riverrat, just hang on and get some popcorn, you'll see I don't bullchit. nor try to rob and decieve people!!!:nonod:

[99f350]

I myself can tell you from my own dealings with Randy(Bigtis) that he's not a bull ****ter. Great guy to deal with and I would buy anything from him again just on his WORD!!!!:thumbsup:

[Riverratt]

Is this the same motor?



<TABLE class=tborder id=post1529269 cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead id=currentPost>http://forums.screamandfly.com/forums/imagesSF/buttons/report.gif (http://forums.screamandfly.com/forums/report.php?p=1529269)
<!-- status icon and date -->http://forums.screamandfly.com/forums/imagesSF/statusicon/post_old.gif 11-30-2008, 05:18 PM <!-- / status icon and date -->

</TD></TR><TR><TD class=alt2 style="PADDING-RIGHT: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; PADDING-TOP: 0px"><!-- user info --><TABLE cellSpacing=6 cellPadding=0 width="100%" border=0><TBODY><TR><TD noWrap>http://www.screamandfly.com/images/team_member_star.gifyoyokidss (http://forums.screamandfly.com/forums/member.php?u=13418) http://forums.screamandfly.com/forums/imagesSF/statusicon/user_offline.gif<SCRIPT type=text/javascript> vbmenu_register("postmenu_1529269", true); </SCRIPT>
Team Member

</TD><TD width="100%"></TD><TD vAlign=top noWrap>Join Date: Jan 2005
Location: Gramercy, Louisiana
Posts: 188



</TD></TR></TBODY></TABLE><!-- / user info --></TD></TR><TR><TD class=alt1 id=td_post_1529269><!-- message, attachments, sig --><!-- icon and title -->motor

<HR style="COLOR: #72a5d8; BACKGROUND-COLOR: #72a5d8" SIZE=1><!-- / icon and title --><!-- message -->i got one very strong 2.5 200 $3000

<HR style="COLOR: #72a5d8; BACKGROUND-COLOR: #72a5d8" SIZE=1><!-- / icon and title --><!-- message -->
i got a 99 carb 200 2.5L ...6 new pistons last summer . low hours.2 new pwrpacks, cut heads,new reeds,velocity stacks,lite flywheel, bobs tuner and solid mounts, with cle lower unit. 260 style fiberglass cowl i made lite. complete running. . 225-939-4560 cody



</TD></TR></TBODY></TABLE>

[elmo4x4]

Is this the same motor?




<TABLE class=tborder id=post1529269 cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead id=currentPost>http://forums.screamandfly.com/forums/imagesSF/buttons/report.gif (http://forums.screamandfly.com/forums/report.php?p=1529269)
<!-- status icon and date -->http://forums.screamandfly.com/forums/imagesSF/statusicon/post_old.gif 11-30-2008, 05:18 PM <!-- / status icon and date -->


</TD></TR><TR><TD class=alt2 style="PADDING-RIGHT: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; PADDING-TOP: 0px"><!-- user info --><TABLE cellSpacing=6 cellPadding=0 width="100%" border=0><TBODY><TR><TD noWrap>http://www.screamandfly.com/images/team_member_star.gifyoyokidss (http://forums.screamandfly.com/forums/member.php?u=13418) http://forums.screamandfly.com/forums/imagesSF/statusicon/user_offline.gif<SCRIPT type=text/javascript> vbmenu_register("postmenu_1529269", true); </SCRIPT>
Team Member


</TD><TD width="100%"></TD><TD vAlign=top noWrap>Join Date: Jan 2005
Location: Gramercy, Louisiana
Posts: 188




</TD></TR></TBODY></TABLE><!-- / user info --></TD></TR><TR><TD class=alt1 id=td_post_1529269><!-- message, attachments, sig --><!-- icon and title -->motor


<HR style="COLOR: #72a5d8; BACKGROUND-COLOR: #72a5d8" SIZE=1><!-- / icon and title --><!-- message -->i got one very strong 2.5 200 $3000

<HR style="COLOR: #72a5d8; BACKGROUND-COLOR: #72a5d8" SIZE=1><!-- / icon and title --><!-- message -->
i got a 99 carb 200 2.5L ...6 new pistons last summer . low hours.2 new pwrpacks, cut heads,new reeds,velocity stacks,lite flywheel, bobs tuner and solid mounts, with cle lower unit. 260 style fiberglass cowl i made lite. complete running. . 225-939-4560 cody




</TD></TR></TBODY></TABLE>

Thats it Riverratt...

Quote:
<TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by yoyokidss http://forums.screamandfly.com/forums/imagesSF/buttons/viewpost.gif (http://forums.screamandfly.com/forums/showthread.php?p=1546861#post1546861)
you think i would sell a bad motor knowing you are bringing a compression guage???
i had no idea of it being bad. and the highest yours showed 150lb.
</TD></TR></TBODY></TABLE>
I call :icon_bs:!!!!!!! You didn't count on Randy bringing a gage to check it! That's why he had to go BUY jumped cables to test it when you had a booster PAC on the ground next to the motor that you said "had a bad end"... Both ends were on it and you know it!!! I will atest to seeing 160+# on one cylinder with my own eyes and I heard Curly call out two more OVER 150#. (Curly was holding the gage). Both me and Curly tagged along with Randy with no intentions other than to meet a fellow s+f member and maybe make a new friend... What we got was CURSED OUT by yoyoBOYS mom. I have met some good people from this board and made some new friends but this is one ordeal I'll just chalk up to a learning experience:mad:
<!-- / message --><!-- sig -->__________________

[Riverratt]

No problem here. I read your other threads on this and saw some of the other excuses and decided to delete my comment. Sounds like he is a wannabe supporting vendor here with all the stuff he is selling when you search his past posts.

[Swamp boy]

Damn, knew that sounded like a lil to good of a deal. Almost bought it before I bought the one I got now. Good thing I decided the other cuz at least I knew this one was blown.:nonod:

[Curly]

I'm glad I was part of that possie because you are so full of sh** (YoYoKid).You are a liar and I'm a witness to everything Randy said.

[bigtis]

I myself can tell you from my own dealings with Randy(Bigtis) that he's not a bull ****ter. Great guy to deal with and I would buy anything from him again just on his WORD!!!!:thumbsup:thanks, bro, I really appreciate it. I take pride in just about anything I do, and it makes it all worth the while when people aren't just happy with you, but more than pleased. Yoyokid handled the situation just like his name states. he's a yoyo, and a kid still living with mom while trying to rip people off. His mom kicked us off the premisis.

[Jay Smith]

I ain't got a dog in this fight but I have dealt with Randy and he's always been a stand up honest guy.. DUNNO the other player.

my .02

[h2oskiier30]

I don't have a dog in the fight either, but to me it's pretty telling that all the posts both here and on fastbass have been suddenly deleted that described that motor.

[bigtis]

I have already did good by outing yoyoboy, Someone in FL was getting money together to send to the LOSER and has just pm'd me thanking me for everything I went through with this so that noone get's screwed.


SNF is a family of members who love to go boating, not boaters who love to **** people.

[Hydrophobic guy]

SNF is a family of members who love to go boating, not boaters who love to **** people.

Got no dog either but, I hate weasle's and cheat's almost as much as thieve's. If we didn't self police and take care of the stand up members which are probably in the range of 95% that frequent the site it would just turn into a bunch of jerk off's tryin to rip each other off and spout nonsensical BS about $hit they know nothing about. Ran fine and turned 6800 before he put it away YAH, RIIIIIIIIIIGHT with two holes down come on guy are you for real? Even got his Mamma involved PAAAAAALEASE!! Glad you caught the weasle. :thumbsup:

[bigtis]

and he honestly had the nerve to tell me 2400 like it is, 400 minus agreed price for a perfectly running mota, and If i didn't want it no big deal cause he'd just part it out and get his money. YEA RIGHT!!!!!! he honestly thought everyone would believe the loser over the supporting vendor with wittnesses. I told him he would still have it later cause EVERYONE interested would know how he handles business.

He told one of the witnesses he only had 800 bucks invested in the mota cause he made the fiberglass hood himself, while another and I were at autozone getting jumper cables. Guess he figured I couldn't compression test it not on the boat with a lifting eye in the flywheel while hanging:nonod:
then tried to act surprised at the compression reading. I knew something was up when we set the mota on the ground and my cables didn't have a good connection. it wouldn't turn starter over. He had a :D look on his face. made good contact on the truck battery, and after the first stroke of the starter he went back to:confused: on his face.

[bigtis]

pay me some money for the diesel i spent going look at you rig you ended up selling less than what i had to offer..
in my opinion a SUPPORTING VENDOR should be a legit working facility of a boat buisness, not a swap and sell guro.

Guys you can beleive what you want but i wouldnt have made anyone come this way if i knew it was bad.
a 6500 $$$ order with someone elses name on it. are you F'ing serious, or are you just that stupid.


My simple answer to your SV OPINION!!!!! IS....... advertize your chit legitimatly and honestly regardless of your Status on SnF. This means throughout life dummydik. The way you handled this says alot about you as an individual!!!!! and your opinions prove that your a (HATER) so to speak. Jealousy is a bad characteristic to have.



They believe you made me come over there for a burnt powerhead. otherwise, send me a 40$ check that won't bounce. that would show some sincerity. You know........ compensation for waisting peoples time, and gas money.

P.S. I sold the a-boat for 1 single more Benjamin if ya must know the facts about the boat you screwed yourself on. and get this, i got to ride around and beat up on bullet's, blazers like you went and bought, and some other goodies for a couple of weeks to only park the boat in my storage area as tho only downfall to the situation.
What A YOYO!!!!!!!

[YELLOWSS]

i have 2 compression gauges and they are 15 lbs different......... it will show a low cylinder though........ not taking side just stating gauges will read different.....

[bigtis]

i have 2 compression gauges and they are 15 lbs different......... it will show a low cylinder though........ not taking side just stating gauges will read different.....
yep, mines maybe 1-2 lbs off. but pretty close to perfect. nontheless. on a 145 mota with one makine 165 and the lowese showing 95. that means a 145 across the highest comp # the lowest would still been 75lbs. half of what it should be right? nontheless what the actual lbs were, he's a ripster!!!!!

[Way2slow on H2O]

Hey Randy, if you're still lookin for a mota with new pistons I have one. I put new Wizards in last year and it ran fine. May need to replace a few plugs, I think when the compression went up to 240 (it does that when it sits for a few months) the pump gas couldn't do its job. I know the crank is good (maybe needs a few welds here and there) cause it still turns. If you can find longer bolts the reed cages can be bolted back on (fell off when the rod caps got too close) but still look good. If you have a universal compression gauge (one that will tighten up in oversized holes) I may can put the starter back on (brackets broke when a rod got claustrophobic and needed to see the outside) but it should have 150/155 across the board (the pistons are still in so it should make compression) but if need be I can give you some JB weld to get the compression where you want it (small holes the size of your thumb are an easy fix). I have the skeg (saved it when we cut it off for the hydro) that can be welded back on ( I read on the net it's easy and people do it all the time on hi-performance L/U's), it's a nice low hour CLE (gettin a lil thin in a few spots from the gear chunks rubbing) but overall I'd rate it a 9 or 9.5. No tuner (heard they don't make any difference anyway) so I tossed it to lose weight. I also heard you don't need both trim cylinders so I removed one of those too. The cowling is an 8 or 9 (eight or nine holes, can't remember) but very usable (especially now that Home Depot carries the better duct tape)

If you're interested let me know, but I don't think I can let it go for three grand, that's a lil cheap for a motor with this much performance background. $3500 and I'll straighten the carb butterflies (rod bearings made some impressions on a few butterflies, nothing a small hammer can't fix) ( I was able to find all the bearings too, may need to make a few cages to hold em on the crank but another easy fix with a bud light can and snips)

One last thing as with any hi-performance motor NO WARRANTY!!! And I'll throw in a good water pump to replace the one someone stole and left a chunk of plastic in it's place (dayum idiots, thought I wouldn't see that big pile of crap) (still puzzles me how they got that rubber and plastic to form like that and it just fits inside that metal round thing) oh, and that's not really an aluminum flywheel like you see on drag motors, I painted that one silver after I welded it back on the crank ( it fell off too many times and I wasn't sure if the rust would effect performance so I painted it) and I have some used plugs I'll throw in the deal (you'll have to solder some straps back on and clean the threads)

I know it sounds too good to be true and I can assure you this is the REAL DEAL!!! New pistons and all (I put new pistons in last year)

Ronnie

[bigtis]

Hey Randy, if you're still lookin for a mota with new pistons I have one. I put new Wizards in last year and it ran fine. May need to replace a few plugs, I think when the compression went up to 240 (it does that when it sits for a few months) the pump gas couldn't do its job. I know the crank is good (maybe needs a few welds here and there) cause it still turns. If you can find longer bolts the reed cages can be bolted back on (fell off when the rod caps got too close) but still look good. If you have a universal compression gauge (one that will tighten up in oversized holes) I may can put the starter back on (brackets broke when a rod got claustrophobic and needed to see the outside) but it should have 150/155 across the board (the pistons are still in so it should make compression) but if need be I can give you some JB weld to get the compression where you want it (small holes the size of your thumb are an easy fix). I have the skeg (saved it when we cut it off for the hydro) that can be welded back on ( I read on the net it's easy and people do it all the time on hi-performance L/U's), it's a nice low hour CLE (gettin a lil thin in a few spots from the gear chunks rubbing) but overall I'd rate it a 9 or 9.5. No tuner (heard they don't make any difference anyway) so I tossed it to lose weight. I also heard you don't need both trim cylinders so I removed one of those too. The cowling is an 8 or 9 (eight or nine holes, can't remember) but very usable (especially now that Home Depot carries the better duct tape)

If you're interested let me know, but I don't think I can let it go for three grand, that's a lil cheap for a motor with this much performance background. $3500 and I'll straighten the carb butterflies (rod bearings made some impressions on a few butterflies, nothing a small hammer can't fix) ( I was able to find all the bearings too, may need to make a few cages to hold em on the crank but another easy fix with a bud light can and snips)

One last thing as with any hi-performance motor NO WARRANTY!!! And I'll throw in a good water pump to replace the one someone stole and left a chunk of plastic in it's place (dayum idiots, thought I wouldn't see that big pile of crap) (still puzzles me how they got that rubber and plastic to form like that and it just fits inside that metal round thing) oh, and that's not really an aluminum flywheel like you see on drag motors, I painted that one silver after I welded it back on the crank ( it fell off too many times and I wasn't sure if the rust would effect performance so I painted it) and I have some used plugs I'll throw in the deal (you'll have to solder some straps back on and clean the threads)

I know it sounds too good to be true and I can assure you this is the REAL DEAL!!! New pistons and all (I put new pistons in last year)

Ronnie
If it had vertex pistons instead of wizards I'd be all over that like yoyo on stupid:p:p:cheers:

[Way2slow on H2O]

They are vertex (just a typo in original post) still want it??? Gimme $2400

[bigtis]

They are vertex (just a typo in original post) still want it??? Gimme $2400
there must be something wrong with this powerhead, that's too cheap. is it an OMC????

[SnakeBit]

exactly, holiday season and he want's to rob someone.!!! it's all good. just the point of the matter. everyone, and I mean everyone needs to know about members like yoyoboy. Merry Christmas to ya!!!:cheers:

so it seems that way Snake. and in the christmas season indeed. he told me, I'll just part it out then and make more. BUT, it the mota was in that shape, what does the gearcase look like on the inside? I would've still got it if he came off the price. He assured me the crank was still good, yea right just like 145 across all 6:nonod:

Merry christmas snake.

Merry Christmas to you and your family. Allin all this is still the place to be. Like Riveratt said imagine this guy saying that he did not think you would bring the guages to test the motor. I can only assume with that answer that he is a yo-yo or he had the intention of beating you either way --- No good!!!
Any way have a happy and a safe prosperous new year!!
Anthony!!!

[Image 21]

yoyokid and heugs can get together what a team that would be :rolleyes: :confused:

[bennyb]

you guys on this forum are great new to the outboard thing but sounds like you caught him on this one,man im not and outboard builder im on my third one been building car motors for 25 years .like the outboards though
those kinda comps cant be hid, to the guy with the motor for 2400 will ya ship .
merry christmas ,
i am from louisiana dont post much because i dont know much,
been looking at motors on here for about a year ,and i wouldnt show to buy one without comp gauge,glad ya got your money back ,
Bennyb

[bigtis]

glad ya got your money back ,
Bennyb
he never seen any:)

[allison8503]

Dam Randy that sucks. "BIGTIS" Randy is a stand up guy that was great to do buisness with. He drove four and half hour to buy my boat after I had just driven six and right before I got to the point on where we agreed to meet the trailor lost a wheel bearing. I called him and told him what happened and he told me not to worry about it. We used his straps to hold up the spindle, he paid me cash just like I asked. He could have been an ******* about it and say he didnt want it our have me try and find a wheel bearing on thanksgiving day but he didnt. My point is he understands when $h!t happens but a broken piston and 165 psi on one hole of a motor that has slightly higher than stock on the rest, my mom knows that aint right.Sorry it happened to you Randy but atleast somebody didnt send him a cashiers check and pay to have it shipped across the country and find out they had been taken to the cleaners.

[bigtis]

Dam Randy that sucks. "BIGTIS" Randy is a stand up guy that was great to do buisness with. He drove four and half hour to buy my boat after I had just driven six and right before I got to the point on where we agreed to meet the trailor lost a wheel bearing. I called him and told him what happened and he told me not to worry about it. We used his straps to hold up the spindle, he paid me cash just like I asked. He could have been an ******* about it and say he didnt want it our have me try and find a wheel bearing on thanksgiving day but he didnt. My point is he understands when $h!t happens but a broken piston and 165 psi on one hole of a motor that has slightly higher than stock on the rest, my mom knows that aint right.Sorry it happened to you Randy but atleast somebody didnt send him a cashiers check and pay to have it shipped across the country and find out they had been taken to the cleaners.
thanks brett. that was my intentions for yoyo. to not allow him to screw anyone else.

[SUPAJAY]

I hate scumbaggs, people like that should be beatin!

Greg should have a "scumbagg" list in the forum section! We should all do a vote for it!!!

Im glad another scumbagg is brought into the open!

[Way2slow on H2O]

Greg should have a "scumbagg" list in the forum section! Would YoYo be right under Bill Gohr???:D

[Big Johnson V8]

I hate scumbaggs, people like that should be beatin!

Greg should have a "scumbagg" list in the forum section! We should all do a vote for it!!!

Im glad another scumbagg is brought into the open!

A list would be nice. Some of us enjoy this type of boating and dont know everything about the mechanical end. If it wasnt for some real honest and very helpfull people like Jim at Warhawk Boats, Jay Smith at JSRE, Mike and Rick at Pops Beaver Race Engines, Joe at Dragon Master Outboard, Rick Conklin and the majority of good people on this site, it would make for a exspensive and miserable time:nonod:

[Vinnie]

Randy,

I have been following this on a couple of boards you post on. I don't know either of you.. I have a few questions for you.

Is there any way he could be telling the truth?? Could he NOT have known the motor was shot?

Hard to believe someone would think he he sell a bad motor to guy that is in all honesty is a "local"..

Thanks.. :cheers:

[bigtis]

Randy,

I have been following this on a couple of boards you post on. I don't know either of you.. I have a few questions for you.

Is there any way he could be telling the truth?? Could he NOT have known the motor was shot?

Hard to believe someone would think he he sell a bad motor to guy that is in all honesty is a "local"..

Thanks.. :cheers:
read my witnesses post, they knew something was up before we even put the compression gauge to it.:thumbsup:

[Vinnie]

read my witnesses post, they knew something was up before we even put the compression gauge to it.:thumbsup:

I read the posts. Was just tryin to be the optimist!!

PS. I would bring my own gauge also........

:thumbsup:

[yoyokidss]

I have a mechanic that can atest to 145lbs on all six 2 months ago, And I have 3 witnesses to atest to 85mph two weekends before boat sold.. No signs of hurt or over heat.

And that so called jump box--- its a 20amp battery charger. how do you crank a motor with that??? and it has 2 end on it thats broken.. I can prove it all.

O and i almost forgot to mention, i now have a gouge in my lower cowl that was mint before this ordeal.:mad:

I never said i have $800 in the motor thats :icon_bs:.
$1200 Lower and mid
$2000 in rebuild
$300 in the made cowl


After all your BS before why would i let you come to my house. it showed no signs of hurt.


AND EVERYONE AT ONE PART IN TIME LIVED WITH THERE MOMMA.

[Image 21]

[quote=yoyokid


AND EVERYONE AT ONE PART IN TIME LIVED WITH THERE MOMMA.[/quote]
oh boy you shouldn`t have said that your going to get slammed :eek:

[elmo4x4]

And that so called jump box--- its a 20amp battery charger. how do you crank a motor with that??? and it has 2 end on it thats broken.. I can prove it all.

:icon_bs::icon_bs::icon_bs::icon_bs:Its easy, Liar...You move the 20 amp battery charger out of the way and grab the F*@KIN Black booster pac you had sitting on the ground. :leaving::mad:

[Hydrophobic guy]

AND EVERYONE AT ONE PART IN TIME LIVED WITH THERE MOMMA.

Kid its time for you to grow up and move away from Mamma and stop telling BS story's. :nonod:

[yoyokidss]

well elmo if you know its a booster pack what brand is it?Surly you saw where it said something higher than 20amp..:rolleyes:
ill take a pic and prove you wrong.i even had a battery charging on the BLACK charger.. yall said that ant good enough.yall need 14v from the truck.
A legit SV or owner of a boat place would know this... Even i do a, a $25 TEAM MEMBER.:thumbsup:


no BS story here.

[yoyokidss]

Im gona go smoke a big fat Dooobbie and drink some beer, and maybe interact whit some real SV's..:cool::cheers: not some hot heads hasseling me bout a $25 membership and a wall-mart battery charger.

[elmo4x4]

well elmo if you know its a booster pack what brand is it?Surly you saw where it said something higher than 20amp..:rolleyes:
ill take a pic and prove you wrong.i even had a battery charging on the BLACK charger.. yall said that ant good enough.yall need 14v from the truck.
A legit SV or owner of a boat place would know this... Even i do a, a $25 TEAM MEMBER.:thumbsup:


no BS story here.

How about this...I am in your area atleast once or twice a week. I can come by your house (if yo momma says I can come over and play). Ill show you the booster pac and then beat your @SS... Hell I'll even buy you a beer after and make you a reasonable offer on the lower that was on the "i didnt know it was burnt on two holes" motor.(on Curly's behalf b/c he was interested in it). If not, STFU and take your bashing like a man... We all had to grow up at some point...Some just take longer than others...:rolleyes:

Oh and p.s... NOTHING was hooked to the "black charger" aka the booster pac so whatever you are claiming to be a charger and hooked to something was NOT!!! Maybe the F@*CIN booster pac fairy teamed up with Santa this year and made a delivery to your house and you dont know... Im not sure but if that took place, your mom could tell you:p She is Santa:eek::eek::eek:Man, hope I didnt ruine that for you:rolleyes::rolleyes::rolleyes:

[bigtis]

your mom could tell you:p She is Santa:eek::eek::eek:Man, hope I didnt ruine that for you:rolleyes::rolleyes::rolleyes:
Priceless, LMAO!!!!:cheers::cheers:

[bigtis]

. Was just tryin to be the optimist!!
:thumbsup:
I'm an optimist majority of the time Also, just ask anyone who's ever had to pull me to the marina:eek::cheers::cheers:

[yoyokidss]

And this is the so called booster back that is good
http://i12.photobucket.com/albums/a229/yoyokidss/DSC04663.jpg

And the all black battery charger was charging a battery on top of the blue ice chest! i thought thast what yall were wanting to use. buy you said 14v 14v..

dont ever come by my house again, dont need a bunch of hot heads here again start screaming and hollering. should of called the cops on yall a$$es.

AND MY MOM SAID HAVE A HAPPY NEW YEAR!!;)

[elmo4x4]

:icon_bs::icon_bs:Thats not even close to the one I saw... I never said you didnt have a bunch of useless ***** at your (MOMS) house. I just said that there was a booster pac on the ground. You two were the ones hollering at us while we were trying to get Randy's tires back. Im over it...We accomplished our goal and now the S+F family knows the truth... I hope you and your family have a great newyear!:cool::leaving:

[yoyokidss]

And this is the so called booster back that is good
http://i12.photobucket.com/albums/a229/yoyokidss/DSC04663.jpg

And the all black battery charger was charging a battery on top of the blue ice chest! i thought thast what yall were wanting to use. buy you said 14v 14v..

dont ever come by my house again, dont need a bunch of hot heads here again start screaming and hollering. should of called the cops on yall a$$es.

AND MY MOM SAID HAVE A HAPPY NEW YEAR!!;)



DONT have a booster pack.. if ya talking bout the other charger that was charging the battery waitn on ya to start the motor.. its still a batter charger.


come on over and look if ya want then ill beat ya with it.:leaving:

[bigtis]

And this is the so called booster back that is good
http://i12.photobucket.com/albums/a229/yoyokidss/DSC04663.jpg

And the all black battery charger was charging a battery on top of the blue ice chest! i thought thast what yall were wanting to use. buy you said 14v 14v..

dont ever come by my house again, dont need a bunch of hot heads here again start screaming and hollering. should of called the cops on yall a$$es.

AND MY MOM SAID HAVE A HAPPY NEW YEAR!!;)tell your mom I said the same to her, but you can Fukk off yoyo:nonod:

P.S. since your so willing to post pictures, post pictures of compression readings on ALL 6 holes.


first you say don't ever come to your house again. you should've called the cops!!!! Then you tell ELMO you'll beat him with the jumper cables.
SO which is it, you want someone to come whoop your ass, OR is remaining where forbidden part of the 2.5 200 mota purchase protection plan.:eek: Face it, you've been exposed. make good by me on the deal, and others will see you are honest and wasn't trying to F me. Until then, your the only one on your side of the fence. Hell, send me 40 bucks for gas and time, and I'll belive you that you didn't know it was burnt and delete the post.

If you'd shipped the mota to someone outta state, then they found out what they got was burnt, WHAT WOULD YOU HAVE DONE!!!!!!! I'd of ate shipping to get it back, you'd have said it was running when you took it off right:confused: Or would you having made an "HONEST" mistake refund the mans money and eat shipping back to you??

[bigtis]

YOYO, I even told you I still was interested in the thing once you make sure the crank is good. Well have you??? Prefer to cover up the past it seems. burnt or not, I wanted to build it. did you not get that. your word that the crank is good after I just drove over there for a perfectly running mota wasn't something I'd exactly bet any money on.

[elmo4x4]

DONT have a booster pack.. if ya talking bout the other charger that was charging the battery waitn on ya to start the motor.. its still a batter charger.


come on over and look if ya want then ill beat ya with it.:leaving:

Hows monday about 4:30 or 5:00... Ill bring me some ass kickin shoes:cheers:

[yoyokidss]

I WILL NOT TAKE YOUR OFFER!!


$40 in gas, um gas is like a buck fifty now no way you burned that much. but just think of the fuel i burned at $5 back a few months ago. id call it even now since i have a gouge on lower cowl that was perfect b4 this ordeal

i would of checked compression numbers again if someone out of state would off bought it. i didnt think there was any need to do this bacause it didnt give me a sign of hurt.I got burnt on here by another S&F mamber for $3500 and didnt like it so why would i do it to someone.

2months ago it was 145, have a mechanic to atest to it.!
85mph 2 weekends ago and have people who atest to that also!

And send you money---um still --even if i did make it good by sending money and you delete post im still labeled here because of your bull****.


How many battery chargers did you see??

[bigtis]

im still labeled here because of your bull****.Yeah, like i really hoped I was driving to your house to be decieved into thinking it was a perectly running, qoute "strong as a 225 promax". Don't think it's my bullchit that got you labeled:thumbsup: I think it's either A, your lack of experience with sales, or B, the book was read.

[MercNuts]

This is getting to be more like gotcha last that we played in the third grade.

Suggestion. Click on users name.

Send a Private Message to BigTis
Send a Private Message to YoYoKidSS

[Image 21]

most battery chargers will turn a motor over.take all the plugs out put your gauge in one hole crank it over that simple.seems yoyo had a chance to sell the motor,even a second time :rolleyes: its a sinking ship yoyo,these guys stick together,and you`ll be surprised how many are closer than you think just my 2 cents :nonod: save yourself, tuck your tail head to the porch

[Forkin' Crazy]

Why don't the both of you go to a local Y with a boxing ring and have it out!!! :eek:

Joking!!! ;)

[yoyokidss]

most battery chargers will turn a motor over.take all the plugs out put your gauge in one hole crank it over that simple.seems yoyo had a chance to sell the motor,even a second time :rolleyes: its a sinking ship yoyo,these guys stick together,and you`ll be surprised how many are closer than you think just my 2 cents :nonod: save yourself, tuck your tail head to the porch


ant tuckin $hit i had no idea ,

ill put my hand on a Bible and atest to it.

[mickeyjr]

this is startin to resemble the jerry springer show!

[jmc]

this is startin to resemble the jerry springer show!

HaHa. I sure am glad BigT wasn't ripped here, but I have to admit I laughed my ass off when someone mentioned getting cussed by "YoYo's Mom". This sounds like something on PUNKED or maybe an OVERHAULING episode. I cant stand people that waste other peeps time with BS, and they should be held accountable. Playing the Dumb card is even worse. YOYO might want split from S&F for 3 or 4 years.

[Skittles]

This thread is pathetic on both sides............noone got screwed......its done, everyone knows the deal so let it go

And to the beatdown threats......grow up.

[bigtis]

noone got screwed Ask Mark Smith if he'd had driven down from South Carolina to buy the boat from me if he would'nt feel as though he'd gotten screwed. After me showing him every possible thing that could possibly turn him off to the boat, he'd changed his mind for right now. Now if I would prefer for him to make those decisions on his own, I'm sure he'd feel as though I SCREWED him. After he drove for 10 hrs. (some peoples mentality is since he drove 10hrs. already, he's gotta take it home or it was a waisted trip!!!) I know what I would want to buy, and so does YOYO!!!! END of story. I went there for a good running mota, and All I got was the shaft.

This situation isn't the same as the one yall had Skittles. from what I gathered yall's was a misunderstanding. YOYO was purposely trying to F someone.

Moral of the story, don't deal with YOYOKID from Gramercy, la.:thumbsup:

[elmo4x4]

This thread is pathetic on both sides............noone got screwed......its done, everyone knows the deal so let it go

And to the beatdown threats......grow up.

Both you and MercNuts need to take your own advice... You two are no more grown up than the other third graders standing around a fight egging it on...Just trying to "stir the pot"... Had everyone pm'd eachother then noone here would have heard about this and someone eventually would have been screwed for the full purchase price instead of just gas money... Noone sent either of you a message to invite you nor did we post it to your page soooo...If you dont like this thread then simply dont click on it...Problem solved;)

[MercNuts]

Both you and MercNuts need to take your own advice... You two are no more grown up than the other third graders standing around a fight egging it on...Just trying to "stir the pot"... Had everyone pm'd eachother then noone here would have heard about this and someone eventually would have been screwed for the full purchase price instead of just gas money... Noone sent either of you a message to invite you nor did we post it to your page soooo...If you dont like this thread then simply dont click on it...Problem solved;)

Rite back at you. Take your own advice. You were not invited either especially not to comment on my post. You are in the third grade grouping also. We have as much right to post on this topic as you do. As some one said above this should have been over before the first page was full. It served its purpose and should have been posted to let other people know. But 5 pages of repetition is unnecessary. Not one fact useful to other membrs has been aded since page 1. It is all just who has the last word. Let it die now before the moderators take it off or lock it down.

[Forkin' Crazy]

Well I can't say a whole lot about the bitching because I have posted a bitch thread where I got screwed... but it was more like 6 grand. NOT 40 DOLLARS and an afternoon. I think you got your point across.

[bigtis]

NOT 40 DOLLARS. I didn't even get screwed out of 40 dollars. the point being If at least 40 bucks were offered, It would have showed some amout of sincereity in the allegedness that he was unaware of the wounded mota. That alone and the situation at hand shows the true colors of it all!!!!!

[Forkin' Crazy]

I didn't even get screwed out of 40 dollars. the point being If at least 40 bucks were offered, It would have showed some amout of sincereity in the allegedness that he was unaware of the wounded mota. That alone and the situation at hand shows the true colors of it all!!!!!

Yea you are right. So how much do you think you would have been out putting it in the promised (lied to) condition? You didn't burn $40 worth of gas?

[bigtis]

You didn't burn $40 worth of gas? NOPE, All the fords and dodges knew their place while we were on the road, therefore I didn't need to give it much peddle:D:cheers:

[Vinnie]

Children,,, Be nice.. This is another post that should be closed. Take this to PMs. :D:D

[Forkin' Crazy]

Children,,, Be nice.. This is another post that should be closed. Take this to PMs. :D:D


I would but my ModCP button won't work. :eek:



;)

[Image 21]

ant tuckin $hit i had no idea ,

ill put my hand on a Bible and atest to it.
all i`m saying is sometimes you need to let sh#% go and move on that`s all been there done that

[SnakeBit]

**** it!! Big tis Keep it goin!! The Boards suck!!! Ain't notin else happenin!!!:p:p:p

Moderator edit: AGAIN, Anthony, please do not defeat the language filter and post words that are past the PG limits.

[Hydrophobic guy]

Snakedaddyboughtmeanewboatbit,
I was wondering why you hadn't opened your flap yet on this post.

[T-REX]

All the fords and dodges knew their place while we were on the road,

Yea, yea yea....Brang a chain to tha nex ralley......Naw, Nevermind, I alwayz carry one fer my unfortunate fren's dat own fordz...But I rekkon I kan use it ta jerk dat chebby in half...juss once anyway!!!!`:D:p:p

[Vinnie]

I didn't even get screwed out of 40 dollars. the point being If at least 40 bucks were offered, It would have showed some amout of sincereity in the allegedness that he was unaware of the wounded mota. That alone and the situation at hand shows the true colors of it all!!!!!

Ok, So how much have you actually lost in all of this?

:cheers:

[Vinnie]

I didn't even get screwed out of 40 dollars. the point being If at least 40 bucks were offered, It would have showed some amout of sincereity in the allegedness that he was unaware of the wounded mota. That alone and the situation at hand shows the true colors of it all!!!!!

Ok, So how much have you actually lost in all of this?

:cheers:

[elmo4x4]

Ok, first off this will be the last time I post on this subject. I wont go making fun of anybody like saying how skittles are the colors of the rainbow and rainbow's represent gay pride (no I dont know from "experience" before you even try to go there) Nor will I call anyone ChinNUts or CircJerk... I WAS INVITED to go with Randy to pick up the motor and I WAS invited to post here because I was a first hand witness to the accusations being tossed around... There are some outsiders who think they are grown enough to go around pointing fingers but truthfully have no idea of the circumstances. This was intended to benifit the S+F family by outing a slimeball. Or even to give him a second chance to make things right. He has obviously opted to turn down the offer on the table so everyone can gather their own conclusion from this. Its not only up to us to leave this thread alone... It has other people posting besides us... I sincerely hope that YOYOKIDSS does come around and make the situation right. This whole thread can be deleted and he can get into good standings with fellow S+Fers again... I hope he and everyone else has a happy new year!!:cheers::leaving:

[Forkin' Crazy]

Ok, So how much have you actually lost in all of this?

:cheers:

How big is your spoon? :eek:

[Vinnie]

how Big Is Your Spoon? :eek:

:d:d:d

[K-Dawg]

Ok, first off this will be the last time I post on this subject. I wont go making fun of anybody like saying how skittles are the colors of the rainbow and rainbow's represent gay pride (no I dont know from "experience" before you even try to go there) Nor will I call anyone ChinNUts or CircJerk... I WAS INVITED to go with Randy to pick up the motor and I WAS invited to post here because I was a first hand witness to the accusations being tossed around... There are some outsiders who think they are grown enough to go around pointing fingers but truthfully have no idea of the circumstances. This was intended to benifit the S+F family by outing a slimeball. Or even to give him a second chance to make things right. He has obviously opted to turn down the offer on the table so everyone can gather their own conclusion from this. Its not only up to us to leave this thread alone... It has other people posting besides us... I sincerely hope that YOYOKIDSS does come around and make the situation right. This whole thread can be deleted and he can get into good standings with fellow S+Fers again... I hope he and everyone else has a happy new year!!:cheers::leaving:

And how could he make it right? Seems to me a few of you have done nothing but, bash him from the get go. I can certainly see why y'all would be pissed. I would be pissed if someone told me the motor was perfect and then was just junk. I aint gonna buy nothing from him. I think you guy's have made your point. His reputation here on S&F not to mention other sites is screwed. You guy's win. So, again I ask how could he make it right?

[Forkin' Crazy]

You guy's win. So, again I ask how could he make it right?


http://i120.photobucket.com/albums/o168/forkincrazy/smilies/beatdeadhorse.gif

[Fish]

http://i120.photobucket.com/albums/o168/forkincrazy/smilies/beatdeadhorse.gif

I am with ya forkin, maybe it is time to go to PM's or even the phone. Hopefully the parties can get this resolved, but not sure how many new constructive points are being made any more. thanks for the heads up bigtis, good luck man.

[Skittles]

:rolleyes:
Ok, first off this will be the last time I post on this subject. I wont go making fun of anybody like saying how skittles are the colors of the rainbow and rainbow's represent gay pride

Is that really the best you got:rolleyes::rolleyes::rolleyes::rolleyes: You get more pathetic with every post.

The more you post the more the picture in my head becomes clear of you and your bozo assclown buddies tryin to make your own episode of cops in this poor kids front yard over a motor that NOT ONE OF YOU GOT SCREWED ON. And you dont know FOR SURE if he knew or didnt know, nor can you prove it. Now, rather than making a simple post, here you internet commandos come again and start throwin threats of violence and demamding to get paid for your gas and time????????????????? Your outta your simple minds. I've never heard anything like this.:rolleyes:

[Skittles]

This situation isn't the same as the one yall had Skittles. from what I gathered yall's was a misunderstanding. YOYO was purposely trying to F someone.

.:thumbsup:

And I was not comparing it to the situation we had.......I just feel this could have been handled different. Credibility goes out the window when people start makin threats, calling names, and carrying on. :smiletest:

[baja200merk]

And to the beatdown threats......grow up.

comin from you:eek:

kid:leaving:

[Skittles]

comin from you:eek:

kid:leaving:


Yes......from me........and if you know whats good for ya, you'll stay up in NY:eek:

[1BadAction]

http://img403.imageshack.us/img403/6599/dramallamasp3.jpg

:D :D

[bigtis]

Ok, So how much have you actually lost in all of this?

:cheers: faith in a SnF member:cheers:


And how could he make it right? Seems to me a few of you have done nothing but, bash him from the get go. I can certainly see why y'all would be pissed. I would be pissed if someone told me the motor was perfect and then was just junk. I aint gonna buy nothing from him. I think you guy's have made your point. His reputation here on S&F not to mention other sites is screwed. You guy's win. So, again I ask how could he make it right? no, we didn't win. Winning would have been me driving to his hous and actually leaving with a mota running or not. He wouldn't make good by me on the price after the discovery of it being burnt. figured I'd drove out there, I was leaving with it regardless the price. He could've made right that night, but he prefers to tell me to shutup over the phone then tells me to shut the fock up over the phone while he's trying to get us to come pick up the mota for 400 bucks less. telling the customer to shut the Fukk up!!!!!! Are you serious,,, NO salesmanship skills whatsoever!!!!


And I was not comparing it to the situation we had.......I just feel this could have been handled different. Credibility goes out the window when people start makin threats, calling names, and carrying on. :smiletest: it could've been handled differently. no internet bull****, BUT his exact words were before he sold it to me for 2K as a burnt mota he'd part it out. WELL, just incase yall were wondering I don't think many will buy from him now:smiletest: now why don't you stop calling names and makin threats. pratice what you preach. I didn't bust your chops or your dads chops in any of the previous outings involving yall. go to your own thread if you don't like this one.


Yes......from me........and if you know whats good for ya, you'll stay up in NY:eek: yeah, bash the guy who didn't try to screw someone on a mota:nonod::nonod::nonod::confused:

[Raceman]

I think every point and counter point that could POSSIBLY be raised is here already, except for one, which against my better judgement I'm askin'.

Is this seller flipping stuff, or was he just selling the engine off his boat?

[bigtis]

I think every point and counter point that could POSSIBLY be raised is here already, except for one, which against my better judgement I'm askin'.

Is this seller flipping stuff, or was he just selling the engine off his boat?
flippin stuff, mota, boat, sportmaster case, burnt engine, some other stuff that he picked up and hasn't used.

[Pro300x24LD]

http://www.penny-arcade.com/images/2002/20021213l.gif

http://theroosterstrikes.files.wordpress.com/2008/01/beating-a-dead-horse.gif


http://www.bjacked.net/LuvToHunt/forums/phpBB2/modules/gallery/albums/album01/Beat_Dead_Horse.jpg

http://www.toondoo.com/public/a/m/i/amit/toons/cool-cartoon-32853.png

http://i17.photobucket.com/albums/b98/horsehater/deadhorse1.jpg

http://www.forumsforjustice.org/forums/images/smilies/other_beatingA_DeadHorse.gif


http://midwestpoet.files.wordpress.com/2008/03/dead-horse.jpg

http://www.cartoonstock.com/newscartoons/cartoonists/mba/lowres/mban2429l.jpg

[yoyokidss]

flippin stuff, mota, boat, sportmaster case, burnt engine, some other stuff that he picked up and hasn't used.


:icon_bs: Liar!!! evevything i sold here i have used for personal use.


YOU DA FLIPPER!!

[mod25]

This thread has to be some kind of a record. The Horse Beating cartoon is some funny stuff!:cheers:

[1BadAction]

YOU DA FLIPPER!!
No, This is da Flipper.
http://img88.imageshack.us/img88/2103/flipperew6.jpg

[Swamp boy]

No, This is da Flipper.
http://img88.imageshack.us/img88/2103/flipperew6.jpg


Now dats some funny **** right der. :p

[Wile E. Coyote]

No, This is da Flipper.
http://img88.imageshack.us/img88/2103/flipperew6.jpg

Jim , What boat is that ? I only remember Bud and Sandy having a 13' Whaler and a wooden row boat . Ranger Rex had the the TriHull with Twin I/O's . Don't recall what the hull was (Brain Fart) . ThunderBird maybe ?

Rich Martin 018:D

PS . This thread deserve a good Hi Jackin !!!

[1BadAction]

I have no clue. that show was on air 18 years before I was born. :D :D

[Pro300x24LD]

I have no clue. that show was on air 18 years before I was born. :D :D
youngsta

[Forkin' Crazy]

I have no clue. that show was on air 18 years before I was born. :D :D

I have shoes older than you. :o

Where have you been anyway? You've been missing out! ;)

[1BadAction]

I have shoes older than you. :o

Where have you been anyway? You've been missing out! ;)
No chit, first job I had out of school, the first thing the guy training me said was "18!? I have underwear older than you!" LMAO.

I've seen ;). I'm off work till the 5th so I have been on the computer minimally. :D

[baja200merk]

Yes......from me........and if you know whats good for ya, you'll stay up in NY:eek:

you better shut your mouth when your talking to me, mafia shmafia:rolleyes: oh and i dont like how you put ur boat on the trailer:eek:




yeah, bash the guy who didn't try to screw someone on a mota:nonod::nonod::nonod::confused:

he already called me to appologize ill let him live:thumbsup::D

[bigtis]

:icon_bs: Liar!!! evevything i sold here i have used for personal use.


YOU DA FLIPPER!!
what about that 2.4 175 with the burnt hole, that you got on the back of your blazer??? I guess you didn't pick that up with hopes of reselling!!!! that's one you told me of yourself. kinda weird that all you post except the ones in this thread have all been in the for sale forums!!!

[Pro300x24LD]

what about that 2.4 175 with the burnt hole, that you got on the back of your blazer??? I guess you didn't pick that up with hopes of reselling!!!! that's one you told me of yourself. kinda weird that all you post except the ones in this thread have all been in the for sale forums!!!
the horse is DEAD

[Raceman]

the horse is DEAD

I agree. I think it's that time.