PDA

View Full Version : Gelcoat


ken medendorp
10-03-2008, 06:41 AM
What is the best product to use for rubbing out gelcoat ,with a Buffer?
Cobra1racer
10-03-2008, 06:51 AM
1000 grit sand paper.
Cobra1racer
10-03-2008, 06:52 AM
http://forums.screamandfly.com/forums/showthread.php?p=1479155#post1479155
Shameless
10-04-2008, 08:11 AM
Go to wizardsproducts.com I use Wizards for my detailingbusiness and I feel it is just about the best out there. They have a good how to section and the company is open to phone calls for advice. Best place to get advice is from the people who make it.
Costa
10-04-2008, 11:02 AM
aquabuff 1000 and aquabuff 2000
www dot aqua-buff dot com
Six Four
10-04-2008, 12:00 PM
3m perfect-it 3000
drasticplastic
10-04-2008, 08:34 PM
Ditto on what sixfour said; if the condition of the gel is not to faded. I start with perfect-it 2000 with a red pad at 1500 rpm's, then use the 3000 with a white pad at just a slightly higher rpm. The gel has to be badly faded to have to get into the "color sanding" deal and the coarse compound and a wool pad then the 2000 and the 3000.