watre spots

[gary slagle]

what is a good product to remove hard water spots from a mid section? has recently been epoxy painted & dont want to scratch or dull it out . paint was done 3 months ago.

[williamsdetailing]

alot of times just rubbing a good paste wax on them will take it out, or find a super fine compound and rub it on by hand. you could use any "clear coat safe" automotive rubbing compound you find and it would save you some money.

[John Stewart]

I have used both Lime A Way and CLR with good results.

Don't leave it on the mid section and walk away. Spray it on, wait maybe 30 seconds and wipe it away with a soft wet cloth.

Repeat if needed. Heavy spoted areas may need require a longer wait time.

This will also remove any wax so re wax when you are finished.

John.

[gary slagle]

thanks john ,:) limeaway ! wipe on wipe off ,no more spots & paint not dulled ,looks like a black mirror again:thumbsup: