Sleeving mid 80's 2.4 200HP Chrome Bore

[RMan]

When these blocks need to be resleeved do they put a steel sleeve in or a chrome bore one back in. From what I've read it sounds like a steel sleeve is normally used.

Also does anyone know about what the rough cost would be both parts and labor? I've been told $200 per sleeve parts and $200 each hole so $800 to do two holes.

[Ryan140]

to sleeve 1 one hole will run you about $200. So your looking at $400 to do 2 holes.

[bw1969]

plus pistons