PDA

View Full Version : Aluminum Flywheel


Martymarr76
02-04-2008, 01:43 PM
I am putting on an Aluminum Flywheel on my Bridgeport. Will this effect my timming? Will I have to make adjustments now that the stock merc flywheel will be removed. It's not a stock motor, reeds, tuner, drilled, carbs, ect, ect.
myron
02-04-2008, 03:01 PM
I always re-check my timing when changing flywheels
j_martin
02-04-2008, 03:30 PM
Timing is generated by magnets in the flywheel. You need to check/reset it.

John
Martymarr76
02-04-2008, 05:50 PM
I am putting on an Aluminum Flywheel on my Bridgeport. Will this effect my timming? Will I have to make adjustments now that the stock merc flywheel will be removed. It's not a stock motor, reeds, tuner, drilled, carbs, ect, ect.
ALL I NEEDED TO KNOW, ONCE AGAIN THE BEST KNOWLEDGE A MAN CAN RECIEVE IS USUALLY BY ASKING? APPERCIATE THE TIME AND EFFORT GENTELMEN MARTYMARR WILL BE SCREAMING JENSEN BEACH NEXT WEEKEND TRYING OUT MY NEW FLYWHEEL, YEEEEEEEEEE HA AS THEY SAY FROM OCHEEEEECHOBEEEEEE. MY MOTHER ALWAYS SAID I WAS A RED NECK BUT GREW UP ON EAST COAST OF FL, SOMETHING WRONG HERE SUN