PDA

View Full Version : Best place to get CMC hyd jackplate


Leo
06-11-2002, 06:30 PM
I was wondering the best place to get a CMC hydraulic jackplate was and what a good price for one should be?
H2Onut
06-11-2002, 06:41 PM
Rick at Rickracer.com


Cant beat the price or service, TOP NOTCH !
Greg Moss
06-11-2002, 06:41 PM
Rickracers .com has some other good ones also.
Greg Moss
06-11-2002, 06:48 PM
You will have some thing delivered to you next week. Most likely monday. UPS Greg
Rickracer
06-11-2002, 07:21 PM
Here's a link........:D
xstreamed
06-11-2002, 07:46 PM
I THINK HE CAN FIND YOU NOW. HEY RICK THE CAR IS AT THE SHOP. THEY CALLED ME TODAY AND SAID THE WATER PUMP HAD GONE OUT. THAT CAUSED THE DIST TO GO BAD ON THAT SIDE. THEY ALSO SAID ALL 4 O2 SENSORS WERE BAD. DO THEY MAKE A HOT ROD CHIP THAT BYPASS THE 02 SENSORS. IF SO HOW MUCH DO THEY COST. HE SAID THEY WOULD PUT 4 MORE BACK IN BUT THEY WONT LAST LONG DUE TO THE AFTER MARKET EXH. AND CAT. CONVETER. I KNOW MY BUDDY TONY HAS A CHIP LIKE THAT ON HIS STANG. :confused:
Rickracer
06-11-2002, 07:54 PM
Unless it's just at WOT, and that's probably what your buddy has. Bypassing them would put you back to 80s technology. I doubt your aftermarket exhaust is having any effect whatsoever on the O2 sensors. I bet all that missfiring did though. They always want to find something else to blame, or something else to sell when they are doing warranty work.
xstreamed
06-11-2002, 08:05 PM
AS LONG AS IT ONLY COST ME 50.00 BUCKS THEY CAN PUT ANY THING THEY WANT TO ON IT. AS LONG AS IT RUNS RIGHT WHEN I GET IT BACK. AND THEY DID CHANGE THE HARMONIC BALANCER
Sleekster
06-12-2002, 05:14 AM
Do a price check at www.overtons.com

Might be a hair cheaper.
Rickracer
06-12-2002, 06:04 AM
Check their price, I will match it or beat it. Simple as that. Rickracers sells for less. Period. :cool:
Sleekster
06-12-2002, 06:07 AM
I'd have given my money to you RR.

Thanks for the replies!
JW
06-12-2002, 06:07 PM
BassPro.com is $197, and I got a $10 coupon in the magazine to pay for shipping. What is your price on the manual jack plate??

Thanks!
JW
Rickracer
06-12-2002, 06:26 PM
I will match the price on the ML-65 (y'all are killin me here :) ), but I can't do anything about the shipping. I ship directly out of CMC, and have no control of shipping costs.
Cp
06-12-2002, 07:49 PM
...but BassPro won't hardly send you the sweat off their gonads for ten bucks let along a 30 lb jackplate. In fact, I'll wager you the actual shipping you'll pay from CMC and Rick will be less than BP's 'shipping/HANDLING' even after the $10 temptation.

Bottom line: Support your 'neighbor'. Call Rick.