More fun testing today, VIDEO

[WILDMAN]

I borrowed a pair of 30" Bravo props from Ospreyproduction to test on the 30 Liberator. He had these labbed with two 1" ventilation holes per blade. I was sure these would never get on plane due to the massive ventilation. MAn was I surprised! Got on plane instantly and pulled hard to 93 mph. Held the nose real high to. This boat is so easy to drive. No hop, no cavitation, NOTHING. Here's a few pics and a video from today. http://youtube.com/watch?v=EOhJsuVkZlQ

[Stitch King]

Any hesitation when you hit the throttle from idle?

[imq707s]

Is that normal?.......the huge rooster tail all the time?

[WILDMAN]

No hesitation whatsoever. Planes instantly without cavitation. The rooster lays down to a couple ft high over 80 mph. Most all tunnels have a high rooster at medium speeds due to the engine hieght.

[Ospreyproduction]

Damn!!!! Don't give out all my secrets!!!

[Ospreyproduction]

Are you turning in or out???????

[WILDMAN]

I turn them in. Turning out seems to make the boat get a "lope" at higher speeds

[Stitch King]

The Bravo 1 was one of my favorite props! Ran a 28 on mine for a while last summer. Only had 1 set of 1 1/8" vent holes in mine. Bogged to much off idle. Also had the holes on the opposite sides of the blades.

Please try it on a 21 with a 300 XS and let us know how it works on that one.

[Wild Wil]

looks good and sounds great nothing better than a pair of black motor!!