eggsuckindog_
07-21-2007, 11:18 PM
Details : '76 SeaCraft Master Angler-1650(dry) '94 200 XRi- 20" shaft- WOT RPM 5600 speed = 45/49 has T Top but should still do better at least down wind. Cruise is excellent @ 27@ 3400 and 31 @ 3800.
The motor is all the way down, it came off a Bass boat in Okeechobee, the not really a problem is its high on the transom, 1.5 to 2" above and I can't trim at all without cavitation, a ton of hull in the water. I will post the standard SS prop thats on it without much cup, my thought is I just need more rake/longer blade style and some cup. I think a Mirage + or Tempest would work, my fear is losing too much hole shot with the Tempest as its not really a racer and I do most at 3400 to 3800 RPM. If I have a couple people in the bow it gets really bad on cavation, I kinda had the same problem with a V8 I put on a 23 SC and we had to get some long blade Protester wheel to get it hooked up, that was a sweet ride.
http://forumpictureprocessor.com/pictureprocessor/images/prop_8.jpg
The motor is all the way down, it came off a Bass boat in Okeechobee, the not really a problem is its high on the transom, 1.5 to 2" above and I can't trim at all without cavitation, a ton of hull in the water. I will post the standard SS prop thats on it without much cup, my thought is I just need more rake/longer blade style and some cup. I think a Mirage + or Tempest would work, my fear is losing too much hole shot with the Tempest as its not really a racer and I do most at 3400 to 3800 RPM. If I have a couple people in the bow it gets really bad on cavation, I kinda had the same problem with a V8 I put on a 23 SC and we had to get some long blade Protester wheel to get it hooked up, that was a sweet ride.
http://forumpictureprocessor.com/pictureprocessor/images/prop_8.jpg