Need Looper help

[1 last ride]

Hey guys i need some help with this v6 looper motor, I noticed that it has a monty racing stamp on the back side of the block and i have been told that is a 2.7L bored over to a 3.0L. looks to me it as good amount of porting done to it. It also has dual stage boyesen reeds, big bore carbs part # 3989020 the jet size is 80, and it has some epoxy in the intake before the reeds, it has no heads and no flywheel and no electronics.

looking to see what the best heads, flywheel and electronics to run, please help

And does anybody how much horsepower it should make when running

Thanks guys
p.s. please help

[jphii]

You need to give Gordon a call to find out exactly what you have. I would say the "BEST" heads to run would come from either Wayne Taylor or Galen Burden. I have both and like them both. Again the "BEST" ignition is going to be the MSD. Galen & Wayne also make flywheels, mine came from Rick Gillman.

Only Gordon can tell you how much hp it's gonna make, and what setup you need to get it there. LOOK HERE (http://montyracing.com/) Good luck!