Guess what this is ...

[Mark75H]

Coming from Steve Roskowski this summer ...

http://www.********************/forums/attachment.php?attachmentid=14584&stc=1&d=1173831320

http://www.********************/forums/attachment.php?attachmentid=14585&stc=1&d=1173831320

[Bruster]

Pattern for a stacker exhaust cover.

[Mark75H]

Steve hopes to have the whole BP Stacker kit for sale early this summer :)

[25ss]

Steve and i talked about him possibly making them a Clayton.
I told him Kenny Kitson had a set and Kenny gave a set to work with at a show we were all at last fall.
Steve is a very talented guy and i am shure he will get them done.
Im hoping to get a set and make some noise!!!!!
Dale!

[MagicFloat]

I'm in for a set, my 1968 1250SS is sitting here waiting for them. Someone please post updates as this project moves forward.

[Tom Smyth]

Got freshly restored 70 1350 shorty that woul dress up real nice with a set of those... count me in too.

smytty

[Mark75H]

Update from Steve:
Stacker update

I've gotten back the stack plate from the foundry. As you would imagine, it was the easiest by far. The elbows have been far more problematic. They are stainless and very thin wall besides. I had talked with several foundries about getting them poured. The cost was just too great. I have thickened them some to try and get aluminum to flow well enough, but haven't had a successful pour yet.

Sorry guys. If it was easy everyone would be doing it!

Steve