T fitting--Fuel Rail

[ChrisXS2003]

Does anyone know the diameter of the orifice in the bypass "t" fitting on a 260 fuel rail setup?

Chris

[YELLOWSS]

i don't know the size , but if you r looking for one it should be easy to get on here!!!! try rl.

Roy

[Jay Smith]

If I'm not mistaken Chris it 0.010" ( I do know first hand that if you go too big it will run like crap ) I use needle or pin drills with a pin vice to clean out the holes which stops up a lot.Tell tale sign of blockage is when you turn fuel pump off the pressure stays up and bleeds down VERY slowly tru the injectors making the motor a bear to restart.

BTW: Mercury part number is 22-17207 and are about $20.00 USD

Good luck

[ChrisXS2003]

Thanks for the info Jay.

Chris