L&S Heads for 120 Looper: which gasket?

[silomon]

Can I use a stock OMC head gasket for the Land & Sea 48cc Heads on a 2.0 V4 Looper, or do I need O-Ring gaskets?

Thanks!
Andreas

[MattGreen]

The stock gaskets work fine - those motors are not o-ringed from the factory. You will probably need to bump up the idle speed a bit because those heads run so cool at idle - motor is a little lumpier. Watch the jetting on top so you don;t hurt the motor.

Any moment somebdoy will jump in here and say those will blow up your motor.

Matt