Da Bull
10-13-2006, 12:31 PM
I have a 98 300PM with the four butterfly air box. I`m having trpuble getting the TPS to set correctly. I have a service manual and followed it to the tee. Problem is I cain`t get anywhere close to the number`s
required. It is supposed to set at .95volts at idle and go to 3.80volts
at WOT. Mine work`s backward`s from that. The voltage number`s
go down instead of up when the throttle is increased. The TPS is not 180
degrees out. I tried turning it that far and got a steady beeping from the horn. the wierd thing is that the motor seem`s to run just fine even though the voltage number`s are way off.
Thanks
Bobby
required. It is supposed to set at .95volts at idle and go to 3.80volts
at WOT. Mine work`s backward`s from that. The voltage number`s
go down instead of up when the throttle is increased. The TPS is not 180
degrees out. I tried turning it that far and got a steady beeping from the horn. the wierd thing is that the motor seem`s to run just fine even though the voltage number`s are way off.
Thanks
Bobby