Diamond Marine Story

[Frank Molé]

just wanted to pass this on........had a problem with my 260 called marty ran me through tests .first thing he said to check was the reeds witch were broke so repaired that ,still no idle and ran crappy till on plain .we talked a LOT then sent me stator next day tryed it on a long shot,still same zhit..talked a LOT MORE with mult.calls never blew me off always ans. my many questions...then we were about to go at injectors but said i wont sell you a set,ill send you a set from my dyno motor to try,this was going to be next day also because i was going to mullica in a few days...anyway told me to check one more thing,and that was it:D :D didnt need injectors was now ready for mullica:D just wanted to say a big THANK YOU MARTY:D YOUR THE MAN IN MY BOOK:D when i need any thing itll be DIAMOND MARINE:D thanks again frank:D happy 260:D

[rpm racing]

so what was it?

[Frank Molé]

the linkage adjustment for the throttle plate.....:eek:

[beer30]

Nice to see a happy ending;) :) !!!!!! Those sad ending depress me!!!!:D And I can atest that the boat ran great on the Mullica!!!!!:cool: Chuck.

[Frank Molé]

Nice to see a happy ending;) :) !!!!!! Those sad ending depress me!!!!:D And I can atest that the boat ran great on the Mullica!!!!!:cool: Chuck.
chuck thanks a lot.:D you should come up for jerry fest:D stay over till sun..mabe mon:eek: well have a blast...you could keep boat at my house,hotel up the road:D :D

[THE HOSER]

the linkage adjustment for the throttle plate.....:eek:


thats what i was going to say :D

marty is a good guy, there a few of them out there

[vector mike]

I have only bought a t-shirt off of him so far but even with that he e-mailed me when he got some in and even sent one for my son for FREE. I mentioned to him on the phone that I wanted 2 and he could only find a large one while I was talking to him but found a small size before he sent it to me. Instead of just charging 2 on my credit card he only charged me 1 and sent the other one no charge. My son loves it and he even wore it to the Palatka race last weekend. ;) It's great to know there are a few nice people left out there. :)

[lightspeed]

Marty And Joe Are The Best ...They Will Spend The Time To Talk To You And Get You through Your Problem ///////I Know Those Guys For 25+ Years And Never Heard a Bad Thing About Them Real Gentleman:) :) :) :) :) :)

[tux974]

They have always been a class act. :)

Frank, Send him the powerhead and you will be going well over 100 :eek: :D ;)
Tony

[Frank Molé]

They have always been a class act. :)

Frank, Send him the powerhead and you will be going well over 100 :eek: :D ;)
Tony
the wheels are turning:eek: :D

[ken medendorp]

Diamond has helped me a TON

[neveredge]

When I was looking for an egt probe for my OMC looper Marty took time to explain some of the basics to me and that was after he called me back and I had already purchased it from another vendor.

Great guy and I will recommend him to all my Merc buddies. Too bad he doesn't do OMCs also.

[offshoresteve]

Marty and Joe are #1 in my book as well.After 15 years of going to local shops and either the work was done wrong,not at all, getting ripped off or all three! I finally found ''The Best Of The Best'' when it comes to High Performance Marine.Never once did they try to sell me something I did not need.I would call sometimes several times a week and Marty or Joe ,no matter how bussy they were, they always took the time to talk and answer any questions.They are both Guru`s in the outboard industry.I will be a customer for life.

[rhickox]

Bought a set of cut heads for my 280 and ran them over the weekend at our rally. Well, phone call @ 9 am Monday and it's Marty to find out how things went. They have always been helpful and will get my future buisness. Most of all they trust people. Every time I have made a purchase I always offer to pay up front but Marty refuses to let me until I have tried my product, his favorite saying " Na just send me a check after you get your pieces". These guy's are top notch and always have a helpful solution to any problem. My 2 cents You are right offshoresteve, they will talk you out of wasting money on bad decisions, and will not sell you something if it won't help you.

[AirRide]

# 1 !!! But I have one question.....What the hell is that big old dirty offshore boat in their parking lot??? Looks like it was buried somewhere & they dug it up, literally!:rolleyes: Is it a personal project of theirs? Anyone know? AirRide

[offshoresteve]

# 1 !!! But I have one question.....What the hell is that big old dirty offshore boat in their parking lot??? Looks like it was buried somewhere & they dug it up, literally!:rolleyes: Is it a personal project of theirs? Anyone know? AirRide

That is a 40`Performance hull. Marty and Joe are going to turn it into a Giant center console for their pleasure boat.I would like to see it with Quad Mrecs:D

[rhickox]

Dang dude you been drinkin' tonight, your fingers are running together:eek: Knowing them it will have 4 Hopped up 280's on it.

[Chummy]

Talked to Marty today about some 280 heads and was a great wealth of info and a pleasure to talk to... I will definetly be doing business with them!

[rhickox]

It only takes one conversation with Marty to realize the vast wealth of knowledge he has . He has probably forgotten more than a lot of us will ever know!

[ZiemerSTV]

I bought several parts from Marty 2 years ago and he even sent me an extra tee shirt. He is always ready to answer my questions. I recommend Diamond Marine highly.

[AirRide]

That is a 40`Performance hull. Marty and Joe are going to are going to turn it into a Giant center console for their pleasure boat.I would like to see it with Quad Mrecs:DYou must mean a 40' "Performer" hull, that was built here in Ft. Lauderdale back in the 80's. Gotcha, now I recognize the boat. That one, though, is gonna need some serious TLC! AirRide

[fast phil]

I met Marty & Joe Over 20 years ago I was running a 20 ft sleekcraft trying to get more out of it,instead of taking my money to get me a little faster he steered me in the right direction into a real sweet stv which I still own. over the years he & joe have helped me with parts & machinework & most importantly straight talk no bull advise that has always given great results. Most recently I upgraded to a 280 offshore powerhead,I was having trouble getting it to rev I tried diffrent computers & a list of stuff finally I called marty even though I hadnt got the motor from him he spent alot of time on the phone trying to get it figured out,finally sent it to him, he made some adjustments,dynoed it sent it back & it ran it like a champ.I was expecting to spend some major cash thinking i had some big problem but thanks to their expertise & honesty they got me back on the water for a minimal expense. I have since put their tuner in & marty supplied me with a new cleaver, again great results always a plus with these guys, Thanks again,anyone looking for the real deal wont be dissapointed with them

[Frank Molé]

:D DIAMOND NO BULL MARINE:D :eek: :D :D :D