riggin a 24 superboat

[Pysco's Path]

INSTALLING A 300 PRO MAX ON A 24 SUPER BOAT WITH A 20" shaft with a 1.61 ratio looking for the right prop and engine height for this application also I have a jack plate would I need this for boat there's theirs a bracket already on the boat from the previous owner application! If anyone could send over some feed back that would be appreicated.

[jerry]

you are gonna want the prop shaft about 2in below the bottom . try a trophy prop . superbash on here has one with a 300x , thinks it runs in the mid 60's . you can email him and ask him about it .

[Pysco's Path]

Jerry thanks for the imput on the prop and also the 2 inches below the bottom , i'll try to email superbash thanks again. PPath.

[little jerry]

...superbash on here has one with a 300x , thinks it runs in the mid 60's .

aahaaahaaahaaaaaaahaaaaaaaaaaaaa !!!!!!!

[amityray]

Mid 60's......?????

http://www.superboatonline.com/24.html

[SUPERBASH]

Sorry. I dont do e-mails. http://img150.imageshack.us/img150/8517/bashyo7.gif (http://imageshack.us)