astro2000
08-16-2006, 10:53 AM
was poking around on my motor and found out that my switch box bias circuit is not wired together. this is my own doing from removing the det cont module 2 years ago. idle timing is 0 max set at 25
first they are supposed to be wired together correct? black and white striped wires from each switch box is there anything else i should of done and didn't?
second have i hurt anything? both switchboxes bias circuit ohm out the same 14.2k what affect does this have on the eng running this way.
this is on a 2.5 merc 200 efi,carbon reeds,oil pump and det cont box removed
third in backyad mechanic terms what does the bias circuit do?
thanks j
first they are supposed to be wired together correct? black and white striped wires from each switch box is there anything else i should of done and didn't?
second have i hurt anything? both switchboxes bias circuit ohm out the same 14.2k what affect does this have on the eng running this way.
this is on a 2.5 merc 200 efi,carbon reeds,oil pump and det cont box removed
third in backyad mechanic terms what does the bias circuit do?
thanks j