VRO removal 175 faststrike 60* looper

[wrechin2]

I am installing a holley red on a 92 60*. I removed the whole assy and putting on a older style primer solenoid. I have a hose that goes to what looks like a equilizer (behing the throttle body and goes to each carb)on the port sided. It originaly went to the pump. The star side goes to a fitting on the lower portion. Then the air cleaner has the one that goes to the lower brg. What do I need to do with the tube? Tee it in with the other side? Plug it off? Thanks! All information appreciated.

[slawson2000]

Not too sure what to do with the tube, but i might be interested in some of your old parts if they are in good working order.

[wrechin2]

OK. what do you need it for? 60, 90, looper-x-flow?

[slawson2000]

Actually it is for a 235. It the rearmost part of part number 5004558. I believe they call it the "inlet housing." Part 5004558 seems to be the replacement for just about every motor. It is the part with the 1/4" nipple and the wires all the way at the back of the pump.

http://im1.shutterfly.com/procserv/47b6d933b3127cce8b6eb907156e00000016102AYs2bNu2Zsb

[wrechin2]

I have taken a couple off of different engines. Call me tonight and I will look to see what I have. I am on central time and will be home around 7:30. Cell is 423-304-0930.

[slawson2000]

Shall do. Thanks