Laser 2.4 EFI ?s HELP!!!!

[Jerry Millington]

Just picked up a complete laser EFI setup it came with
2 boxes one of the boxes has a long extra wire with
knob (KNOBPOT)(??????).
I have 2 - 2.4s should i try this EFI setup (PROS & CONS)?
Also need help to figure out the wiring.
Let me know your thoughts PLEASE.
thanks jerry

[T-REX]

I no ya didn't buy them for flowerpots...The laser injection in it's stock form will hit harder out of the gate, but won't show U any differnt numbers on the top...Now, wit sum work, it will run wit a horn!!! Did U git the whole wiring harness??...REX:cool:

[Jerry Millington]

AS far as i can tell yes.
What do you mean ? (HORN)
jerry

[Jerry Millington]

OK i got a manual and know i find that i'm missing
the fuel vapor separator (have the pump).
I was told that everthing was included,Well you know
how that goes.
So i'm in need of a vapor separator. HELP
jerry

[T-REX]

Put the pump in the boat...run a return line back to the tank...the seperator jus blo9cks good air anyway...if U have the filter still mounted on the starboard side, remove it and put it in the boat...The harness ain't nuttin to hook up, the coil wires are marked 1,3&5 and the other 3 goes to the pack that feeds 1,3&5(should be inside pack)...then Plug in the harnes and ness. wires...Be SURE to ground the airbox(double ground if ness), don't depend on the bolts, cuz that ain't enuff...be SURE ECU iz grounded with wire to block...I think U will like the efi...the more U learn, the better u will like it(Maybe)...REX:cool:

[Jerry Millington]

T rex
Thanks i will take your advise.
jerry