omc idle jets

[charger19]

'89 omc 200 mild port work and small chamber heads.I've put .014 in the mids and installed the 106 air nozzles.The carbs had .035 idle jets, is there any need to change these?I've done the synch/linc and the engine starts and idles fine.Thanks!

[FCnLa]

If it idles well and does not sneeze, I think you would be OK. I have a crossflow that I have modified slightly. I have changed the mains and mid range, but left the same air bleeds in the idle circuit. It idles fine. :)

[charger19]

Thanks,FC