throttle cabel adj.

[atgill]

I need to adjust my throttle cabel on my 225x
You have to take your foot and pull the hot foot back a little to make motor shift to nutrual. I have adjusted the spring on hot foot, that didnt help...


Thanks Andy Gill

[TAXXIVADER]

sounds like your throttle cable needs a little more pre-load onto the throtle arm.. do this by makin sure the hot peddle has returned all the way back ,,disconnect the cable from the engine & wid the barrel forwards until there is a slight pushing action on the throttle arm.this should ensure the throttle returns to the idle position when you take the foot off the pedal. hope dis helps . taxxivader ;)