User Tag List
Results 256 to 270 of 360
Thread: laser owners
-
06-22-2015, 01:16 PM #256
-
06-27-2015, 11:53 PM #257
Great boats ..was on a 19 foot years ago had a 175 merc. Been looking for one for a long time.
-
06-28-2015, 12:10 PM #258
A couple of pics from the Raindack Romp with my redone Laser 380 comp. (Thanks again Cutwater!)
"If everything's under control, you're going too slow"
-Mario Andretti-
76 vixen,.. on the back burner
82 laser comp. 380 ray
PICS OF THE VIXEN REBUILD
-
06-29-2015, 08:15 PM #259
Looks great! What are you running for power? How does it run?
79 Checkmate Predictor 2.4 200, 00 Bullet 20XDC 2.5 280
-
07-02-2015, 10:24 AM #260
Our Laser LTV
Here's a short video from Memorial Day and a picture from Father's Day 2015. Our boat was built in July 1987 (1988 Model), it's been in the family since it was built and my son has already claimed it if I ever decide to let it go.
<iframe width="560" height="315" src="https://www.youtube.com/embed/6WhpyNHt8VQ" frameborder="0" allowfullscreen></iframe>Jeff & Suzette Georges
Nitrous for your motor is like cocaine........a little probably won't hurt, the problem is only doing a little!
-
07-02-2015, 11:44 AM #261"If everything's under control, you're going too slow"
-Mario Andretti-
76 vixen,.. on the back burner
82 laser comp. 380 ray
PICS OF THE VIXEN REBUILD
-
07-03-2015, 11:38 AM #262
16' Vpad Laser Basser
Ok here i what I need. I want a full on resto with composits n need stringers and knee braces and transom of composits. I need the best to take what I have to a turn key boat paint n all including rigging. Need ideas on who to talk to. Okfolks where do I start
Laser 1550 ...under construction with a serious weight loss
Motor 2.4....undecided on hp yet
-
07-08-2015, 08:40 PM #263
I must say ive never heard of any 2.0 stock 150 running mid 80s pushing 90????? Sorry but not buying that number
-
07-08-2015, 09:05 PM #264
The motor isn't a stock carb. motor, but the block ports are. It's a bone stock block that I added a 7 peddle front half and center horn EFI and I'm running a PCU. A bunch of people know me on here, I'm not someone that lies about my speed. It does what it does.
The goal is 90, it's definitely possible but will take more setup work (and probably a light load of fuel). I have 18psi at full throttle so I have plenty of motor height to play with."If everything's under control, you're going too slow"
-Mario Andretti-
76 vixen,.. on the back burner
82 laser comp. 380 ray
PICS OF THE VIXEN REBUILD
-
07-09-2015, 08:14 AM #265
Sounds like a neat setup. What are you running for setback, prop, lower? Do you know what the hull weighs vs a regular layup 380?
79 Checkmate Predictor 2.4 200, 00 Bullet 20XDC 2.5 280
-
07-09-2015, 10:56 AM #266
The boat was an old ModVP raceboat, it has a kevlar hull. I think it was around 500lbs originally but I made it a little heavier with the rebuild. It's significantly lighter than a normal 380, you can clearly see it when you look at how high it floats in the water.
setup:
Setback - 6 or 8", I forget.
200 lower w/nose cone 1.87 gear
26p chopper with a hoss type cut. (not a great prop, but it runs)
The best I've got so far was about 6600rpm."If everything's under control, you're going too slow"
-Mario Andretti-
76 vixen,.. on the back burner
82 laser comp. 380 ray
PICS OF THE VIXEN REBUILD
-
07-09-2015, 04:05 PM #267
-
07-20-2015, 01:51 PM #268
-
07-20-2015, 02:06 PM #269Junior Member
- Join Date
- Dec 2008
- Location
- Austin Texas
- Posts
- 21
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 0
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
07-20-2015, 03:16 PM #270
looks like it, here is the ad:
http://milwaukee.craigslist.org/boa/5066213142.html79 Checkmate Predictor 2.4 200, 00 Bullet 20XDC 2.5 280