User Tag List
Thanks: 0
Results 1 to 3 of 3
-
12-01-2017, 04:09 PM #1
Leak down tests pressure and time ?
When doing leak down tests on your engines what time periods are the tests done over ? 20 minutes ? 1/2 hour 1 hour ?
and at what pressures do you use for testing ( 2 strokes only please ).
what is considered an ok amount to leak down over such periods..
-
12-02-2017, 12:30 PM #2
You adjust the supply air to read 100psi, look at the other gauge if it says 90 you have 10% leak down. No need for a set time if leaks it leaks 10% or more teardown time.
Dave1980 Cougar 19 tunnel,90 2.4L Bridgeport EFI in middle of restoration.
1988 BAJA Sunsport 186, 96 225 Pro Max
79 12' Auminum, 95 Merc 9.9
RIP Stu
"So many idiots, so few bullets"
-
hydrostreamvking4m, vnemous liked this post
-
12-02-2017, 01:32 PM #3James H. W2F a V-King... Want 2 Fly a V-King
Dedicated Site for Hydrostreams >> http://hydrostreamforums.com/
My Project 1979 V-King restore >> http://hydrostreamforums.com/viewtopic.php?f=9&t=2761
-
Dave Strong liked this post
Similar Threads
-
How much run time before leak down test
By CircleHook in forum Technical DiscussionReplies: 9Last Post: 07-05-2017, 04:25 PM -
3rd time apart water leak OMC, pics
By xp175 in forum Technical DiscussionReplies: 11Last Post: 06-02-2006, 03:49 AM -
1'st tests on the 115 PH.
By Clams Canino in forum Technical DiscussionReplies: 1Last Post: 08-04-2002, 10:13 AM -
fuel pressure leak. anyone??
By TD in forum Technical DiscussionReplies: 1Last Post: 05-31-2002, 05:35 AM -
the TESTS are in!!!!
By 2.5-21 in forum General Boating DiscussionReplies: 41Last Post: 04-05-2002, 11:54 PM