Mystery Part

[pbxcomm]

"Poppet off a 500 promax" : Reverse Osmosis.. Good one..

Not helpful!

[perfmarine1]

36 0r 37? Did you have the throttle assy apart

http://www.boats.net/parts/search/Me...DLE/parts.html

[pbxcomm]

That's for a 9.9..
The motor I'm actually working on is a 2000 90HP Merc..

Thanks

[Capt.Insane-o]

It's the drain grommet for the lower cowl.

[Capt.Insane-o]

Don't everybody pat me on the back at once!

[Chaz]

[FMP]

It's the drain grommet for the lower cowl.

Nope, it's the drain grommet for the lower cowl.

[flabum1017]

Your'e wrong... it's the fuel regulator diaphragm grommet that seals the rust ring encapsulator to the fuel pressure regulating spring shaft. without it, you will experience low fuel pressure resulting in a lean condition on cylinder two and a resulting failure of the anti-rotation pin for the piston ring on said cylinder causing the piston ring to catch the exhaust port and dragging a gouging into the piston and cylinder wall. A total rebuild will be necessary.... Just send it to Jay Smith, he will get you straightened away.........................

[fichrman2]

And NOW we know what happened to cyl #6

[FMP]

Cyl#6, who's he?

[flabum1017]

Cyl#6, who's he?

That's the lean dude we all hate

[pbxcomm]

"rust ring encapsulator to the fuel pressure regulating spring shaft"
Is this what I'm missing? Suppository for pressure (positive or negative) of the cylinder relief ring?

[pbxcomm]

Jay Smith..
Are you here and present?! Need you your assistance, please!

[FMP]

That's the lean dude we all hate

He gets enough to eat, goes through him just can't hold enough in .

[olboatman]

Threads like this are by far the most entertaining....and I learned somethin--- I WON'T advertise that I got extra parts on the bench!!!!! lol
Gary