Top part of late model 2 piece 200 tuner adapter needed

[Jay Smith]

Im gonna make this horrible story short , wife's kinfolks got a load of water in his gas from a marina in his salt water 200 EFI , took the motor out , it set for about 2-3 months , now him and I worked like slaves separating power head ( 7 Hours ) got gap opened and used a sawzall to cut bolts while wedging we ruined the top part of his two piece and I need one , BTW I had to weld up bottom of the block and straighten as it was misshaped also , if anyone has one of these around contact me and we can get it coming ....

Salt water plays havoc on aluminum !!!!

Jay 832 597 2603 or hitman6563@yahoo.com

[bullet123]

I had to do that a couple of times too. I used a zip wheel on a grinder and cut through the top plate and cut the four longer bolts. I won't touch a salt motor anymore. I'm pretty sure I have what you need. PM me your shipping address

[bullet123]

Shipped

[Jay Smith]

Are you Trent that contacted me , if so :
address is ;
JSRE
181 Dagger Drive
Brookeland , Texas 75931

if not Trent has been so gracious to be send me one ..

Jay

[bullet123]

Yes, same person.

[Jay Smith]

Thanks Trent, your "stuff" is on the way USPS 2nd day.........

Jay