User Tag List
Results 1 to 5 of 5
-
06-21-2017, 10:27 AM #1
16 amp stator ohm test? (merc, not cdi)
embarrassed...... anyone have it?... memory sucks and can't find tha right manual!
-
06-21-2017, 11:45 AM #2
900-1100...but I cant remember if that is for 16 or 40 amp....
Go Time
2003XS GS 225 Promax/ 260 / 280
26 Regulator twin 250 EFI
-
06-21-2017, 11:53 AM #3
think thats part of it...but, i need
colors and values wire ta wire, wire ta ground, hs, ls... can't even find my hi perf stuff.. guess won't be long 'fore little bride will be throwin' dirt in my face............
-
06-22-2017, 06:22 AM #4
Testing 16 amp stator
All when disconnected. Between yellow leads, about 0.75 ohms. Open circuit to ground from either.
Red or red/w lead to ground is 125 to 175 ohms. Blue to red, or blue/w to red/w is 5400-6200 ohms.
Yellows will yield about 15v per 1000 rpm open circuit. (2000 rpm = 30 v, etc.)Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
tlwjkw thanked for this postXstreamVking liked this post
-
06-22-2017, 07:21 AM #5
thanks bud!!!...
Similar Threads
-
Stator test on Merc 200 EFI
By Wakestocker in forum Technical DiscussionReplies: 3Last Post: 09-01-2015, 02:51 PM -
How to Stator test?
By surh56 in forum Technical DiscussionReplies: 17Last Post: 02-14-2008, 12:02 AM -
stator test
By valero1990 in forum Technical DiscussionReplies: 2Last Post: 07-09-2007, 08:34 PM -
stator test
By wrenchhead30 in forum Technical DiscussionReplies: 1Last Post: 06-30-2006, 09:23 PM -
How do you test a stator???
By Georgia Boy in forum Technical DiscussionReplies: 2Last Post: 07-06-2004, 10:18 PM